弯曲的例句大全

Adding GF increased not only tensile strength and bending modulus but also impact strength of the composite.

GF的加入不但提高了材料拉伸强度、弯曲性能，而且提高了其冲击强度；

The fracture toughness K IC and interphase energy G IC of Ag-Cu/ Ti nan'on bilayer film and Ti monolayer film composite system are tested by unilateral gap three-point bend method and double cantilever beam method.

用单边缺口三点弯曲法和双悬臂梁法分别测试了Ag-Cu/Ti纳米双层膜及Ti单层膜复合体系的界面断裂韧性KIC及界面断裂能GIC。

Experimental Studies on the Bend Deformation of Welding Structure

焊接结构弯曲变形实验研究

Analysis for stiffness on the bend vibration natural frequencies of a helicopter tail drive system

刚度对直升机尾传动系统弯曲振动固有频率影响的分析

The study on the experiment of wall thickness deformation of coreless bended small-diameter tube

小直径管无芯弯曲壁厚变形的试验研究

Application of Intelligent Instrument in Beam Bending Normal Stress Experiment

智能仪表在直梁弯曲正应力实验中的应用

Influence of Laser Beam Bending on Thickness Measurement of Hot Steel Plate

光线弯曲对激光测量热钢板厚度的影响

A simplified calculation of stair beam bending and deformation

阶梯式梁弯曲变形的简化计算

Test Research on the Bending Resistance of Segment for Subway Shield Tunnel

地铁盾构管片弯曲变形特性试验研究

Bending Resistance of Pipes with Local Defects

含缺陷管件的抗弯曲特性

Investigation of influence factors on bending modulus of carbon fiber/? Epoxy

碳纤维/环氧复合材料弯曲模量影响因素的研究

Improvement of Experimental Equipment of Pure Bending Normal Stress

纯弯曲正应力实验装置的改进

Bending Fatigue Testing Machine of Automobile Wheel Based on Microcomputer Control

基于微机控制的汽车车轮弯曲疲劳试验机

Open Cross-Section Beams Under Pure Bending ⅱ. Finite Element Simulation

纯弯曲开口横截面梁的有限元模拟分析

Test and Research of Concrete Creep for Beams Under Pure Bending Loads

纯弯曲混凝土梁的徐变试验研究

Strain Damage Failure Analysis and Prediction for Beams under Pure Bending Loads

纯弯曲梁的应变损伤失效分析和预测

Simulation Experiment of pure Bending of beam Based on VB

基于VB的梁纯弯曲电测模拟实验

Bending modulus of CF/ KF hybrid composites are on the rise with carbon fiber volume fraction increasing.

CF/KF混杂复合材料的弯曲模量随着碳纤维相对体积分数的增加而呈上升的趋势。

In a beam type compensator a stress pattern produced by pure bending is frozen into the material.

在梁式补偿器中，其应力光图是由纯弯曲产生而被冻结在材料之中。

In observation, there is a southward jet in the western boundary of the South China Sea ( SCS), when the north wind is strong in winter. The jet stream can bend into wave, even eddy under certain conditions.

观测表明，当冬季盛吹北风时，在南中国海西边界附近将形成一支向南的急流，在一定条件下这支急流可弯曲成波动甚至形成涡旋。