推导的例句大全

According to the principles of partially coherent light imaging, a new method of white light malti processing is proposed, and some necessary formulae are introduced.

本文介绍并推导了用部分相干光成象和用作光学信息处理的原理和公式。

Equation between inter-yarn air permeability and parameters of fabric structure was deduced based on Hagen-Poiseuille hydromechanics.

利用哈根伯肃叶定律,推导出机织物的纱线间孔隙透气量与织物结构参数的关系式.

The Deduction and Calculation of the Tooth Form Factor YFa and the Tooth Root Stress Concentration Factor Ysa

齿形系数Y（Fa）与齿根应力集中系数Y（sa）的推导与计算

Then, based on the above performance analyses, a novel relay selection scheme, named Maximum Average Bidirectional Mutual Information ( MABMI), is proposed and the closed-form solutions to the system outage probability and ABEC of the proposed scheme are obtained.

然后基于上述性能分析，提出了平均双向互信息最大中继选择方案，并推导出该方案的系统中断概率和平均双向各态历经容量的闭合解。

Starting with the Lippmann-Schwinger integral equation, the fundamental equation of arrangement channel quantum mechanics ( ACQM) has been re-derived using the Green's operator method.

从Lippmann-Schwinger积分方程开始，然而用格林算符方法，重新推导了排列通道的量子力学（ACQM）的基本方程。

According to the double-cross mating design and using principles of Cockerham's general genetic model, a genetic model with additive, dominance and epistatic effects ( ADAA model) was proposed for the analysis of agronomic traits.

根据双交组合方式的交配设计，运用Cockerhaln广义遗传模型的建模原理，提出了适用于分析作物农艺性状的加性－显性－上位性模型（ADAA模型），推导了不同世代群体的遗传效应分量。

Through lots of finite element examples and theoretical derivation, the formula for calculating stability ultimate bearing capacity of BDRM was achieved.

通过大量有限元算例并结合理论推导，获得了这类构件的稳定承载力计算公式；

A method of determining the incident angles distribution on dichroic mirror is presented, according to the theoretic analysis of working condition of dichroic mirror in optical engine.

本文通过对二向分色镜在投影光路中工作状态的模拟和分析，提出了一种计算分色镜上光束入射角分布的计算方法并推导了相应的表达式。

In the analysis, the error estimate for the fundamental differential equation has been made and h~ 2-extrapolation formula for its salution has also been derived. The results from the extrapolation formula are quite close to those from other current methods.

在分析中，对基本方程进行了误差估算，并推导了h~2&外插公式，所得结果和现有的几个方法比较接近，说明在工程中使用是可行的。

In this paper formulas of coupling coefficients for thickness extensional and thickness shearing vibration modes along rotated axis for Lithium Niobate were obtained by Methods of matrix calculating and tensor calculating.

本文利用晶体的压电、弹性、介电矩阵，通过矩阵及张量运算，推导出铌酸锂晶体厚度模机电耦合系数的精确公式。

When discussed the transesterification reaction, the formula used to calculate ester interchange rate based on the oil's relative molecular weight and the increase of hydroxy group was derived;

在讨论油脂的酯交换改性反应时，推导出了可根据油脂的平均相对分子质量和酯交换后羟值的增加量计算酯交换率的近似公式；

In this paper I have strictly derived these formulae about Landau Diamagnetism by using the theory of statistical mechanics of ideal Fermi system and Laplace transformation.

本文采用理想费米体系统计力学有关理论和拉普拉斯变换，严格推导了朗道抗磁性的有关计算公式。

For Box-Jenkins systems with correlated noises, a bias compensation least squares ( BCLS) identification method is proposed by means of the bias compensation principle.

对于存在相关噪声干扰的Box&Jenkins系统，本文借助于偏差补偿原理，推导了一个偏差补偿最小二乘（BCLS）辨识方法；

Application of Higher-Order CMAC Neural Networks, the BMAC to tbe Modelling of Robotic Dynamics The method of robotic dynamics to derive the dynamic equations of the swing of load is accurate and convenient and it has good regularity.

机器人动力学模型的BMAC多网络模拟采用机器人动力学方法推导起重机吊重摆振动力学方程具有准确、方便、规律性强的优点。

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析，应用全量理论，推导出了变形区应变、厚度及变形时材料真实应力的分布规律

General expressions of the magnetic vector potential for multipole fields are derived.

推导出了用多极场空间谐波函数表示的磁矢位的通项表达式.

Equation between inter-yam air permeability and parameters of fabric structure was deduced based on Hagen-Poiseuille hydromechanics.

利用哈根 - 伯肃叶定律,推导出机织物的纱线间孔隙透气量与织物结构参数的关系式.

The detection and reconstruction of wavefront by Lateral Shear Interferometer ( LSI) and Hartmann Wavefront Sensor ( HWS) have been deduced analogically and simulated numerically.

对横向剪切干涉仪和哈特曼波前传感器的波前探测和复原进行了类比推导和仿真计算。

Immediately after the point introduced a new central fuzzy system CTSK ( Central TSK Fuzzy System) is introduced.

接着引入并详细分析推导了一种新的TSK模糊系统CTSK（Central TSK Fuzzy System）。

Onthe basis of two fundamental conceptions& mobility and connectivity of the mechanism, we get two conditions which must be satisfied by a robot hand-mechanism.

本文在引进机构学两个重要概念&活动度（Mobility）和连通度（Connectivity）的基础上，推导出机器人手部机构必须满足的两个条件。