曲的例句大全

Crank angle between extreme position effects transmission performances of mechanism in crank-slider mechanism directly.

在曲柄滑块机构中，极位夹角θ的大小直接影响到机构的传动性能。

A New Design Method of Double Crank Mechanism

双曲柄机构设计新方法

Optimized of parameters of basic dimensions of double crank shaft mechanism

双曲柄机构基本尺寸参数的优化

Application of model 160 double crank camera in strategic range

双曲柄式160摄影机在战略靶场中的应用

Motion Analysis of the Planetary Gear Drive of the Double Crank Type

双曲柄式行星齿轮传动的运动分析

Modeling and optimization of double crank slide block steering mechanism

双曲柄滑块式转向机构的建模及优化研究

Analysis of Friction Losses for Double Crank and Connecting Rod Diesel Engine

双曲柄连杆机构柴油机的摩擦损失分析

Dynamic analysis of double crank piston mechanism

双重曲柄活塞机构动力学分析

Right change& over of the driving crank for typical four-link mechanism

典型四杆机构主动曲柄的正确转向

The facility is operated by the driving of crank to keep a guide rod stable and overwork under high speed, Moreover, it is also available to4 pieces of heald frame according to density.

设备转动通过驱动曲柄来进行，配备导杆不会有颤动、且高速下可以超负荷运转。

L27/ 38 crankshaft folding defects mould key parameter optimization was researched, and through comparative analysis reasonable Die key parameters were obtained.

针对L27/38曲轴锻件折叠缺陷进行了模具关键参数优化，通过对比分析得出合理的参数选取范围。

Coat the sealing ring inside and out with fresh engine oil and pre-position it on the crankshaft flange.

用新鲜机油涂抹密封圈内外侧，并预先放在曲轴法兰上。

Carefully remove smaller edges or burrs on the chamfer of the crankshaft flange with an oilstone if necessary.

如有必要，请用油石仔细去除曲轴法兰倒棱上的小边或毛刺。

Crankshaft is the key component for the diesel engine of large ships.

大型曲轴是大型船舶发动机的关键零件。

Heave crankshaft is the key component of diesel engine.

大型曲轴是柴油机的关键部件之一。

A crankshaft, a key part of automotive engine, can influence the quality and life of an automobile.

曲轴是汽车发动机关键零件之一，其性能直接影响汽车的质量和寿命。

Crankshaft is the key energy conversion part in emulsion pump and the best complex component in the processing techniques.

曲轴是乳化液泵能量转换的关键元件，同时也是加工工艺最为复杂的零件。

By precise and automatic measurement, fewer cost and higher efficiency may be brought to the production of engine crankshaft, a key part in engine that holds complex structure and requires high precision in dimension.

发动机曲轴结构复杂，尺寸精度要求高，检测难度大。对其进行自动精确的检测可以提高效率，能显著降低生产成本。

The fiber's crimp degree was improved and its strength was substantially retained.

经过等离子体处理兔毛纤维的卷曲度得到提高，兔毛纤维的强度基本不变。

Characterizing Wool Fiber Crimp by Image Analysis

图像法测定羊毛卷曲度