有限的例句大全

On the Ordered structure of A Class of Finite BCK-Algebras

一类有限BCK－代数的序结构

The Security Problems in Analysing the Hand Shaking Process of TCP Protocols Using the Finite State Machine

利用有限状态机分析TCP协议握手过程的安全问题

The Elastoplastic FEM Simulation of Free Bulge Forming of Metal Tubes under Internal Pressure and Axial Compression

金属园管在内压及轴向压力作用下自由胀形的有限元法模拟

An Investigation of the Effects of Geometry of the Flat Workpiece Magnetic Impulsive Forming System on the Final Deformation by the Finite-element Analysis

板坯磁脉冲成形系统几何参数对终态变形影响的有限元分析

The finite-element analysis of bulging process has been made to investigate the effects of geometry of the magnetic impulsive forming system on the final deformation.

通过铝板毛坯胀形过程的有限元模拟，分析了磁脉冲成形系统几何参数对终态变形的影响。

Acid-fast and spore stainings improved by the cover of filter paper and heating Thermo-mechanically coupled FEM analysis for drape forming process of fighter plane canopy

抗酸染色和芽胞染色的改良型滤纸覆盖加热法歼击机座舱盖热力耦合覆盖成形的有限元初步分析

FE analysis of creep age forming for Aluminum alloy 2324

2324铝合金蠕变时效成形有限元分析

In this paper, H foreign trade company of sports protective equipment are facing how to allocate limited resources to the right customers, This paper proposed a two-step customer classification method.

本文针对运动防护用品H外贸公司所面临的如何将有限的资源分配于合适的客户，提出了两步客户分类方法。

A 3D FE model of double plex tread extruder head was established by selecting proper unit form properly dividing network units to obtain and analyze the pressure profile in head runner under a certain working conditions.

通过选取合适的单元形式及恰当的划分网格单元，建立胎面双复合挤出机头的三维有限元模型，得到在一定工艺条件下机头内部流道的压力分布情况并分析其原因。

The manufacture craft of stainless clad strip which is belong to bimetal composite plate is carried out in this paper, and the hot-rolled process of stainless clad strip is simulated using the large finite-element software MARC.

本文利用大型有限元软件MARC模拟了不锈钢复合板的热轧过程，并讨论了不锈钢复合板轧制过程最佳相对压下量问题。

In this paper, we choose the frame of a new type solar battery farm tricycle designed and manufactured by china 001 group as research object.

本文以中国001集团开发的新型太阳能电动农用运输三轮车车架为研究对象，利用通用有限元分析软件MSC。

Open Cross-Section Beams Under Pure Bending ⅱ. Finite Element Simulation

纯弯曲开口横截面梁的有限元模拟分析

Using finite element method for 16 frame-supported continuous masonry walls composed with the normal law, the paper presentes a simple method of calculating bending moment of control cross section of joists based on Matlab.

通过按正交设计的16榀框支墙梁的有限元结果分析，采用Matlab程序回归得出了托梁控制截面弯矩计算的简单公式，可以供设计者参考。

FEM Analysis of Effect of Bending Force on the Crown of Strip

弯辊力对带钢凸度影响的有限元分析

Rational Finite Element Method for Elastic Bending of Reissner Plates

Reissner厚板弹性弯曲的理性有限元法

At first, utilized ANSYS to analyze the anchorage zone on the cable bent tower and investigate stress distribution and deformation at the area.

首先利用ANSYS软件针对索塔锚固区所选节段进行了详尽的空间有限元分析，考察索塔锚固区的应力分布和变形情况。

FEM Analysis on Building Berth and Chute Structure and the Low Strain Test on Its Pile Foundation

船台滑道结构有限元分析及其基桩完整性测试

The bilinear programming is converted into a max min problem on the principle of duality, and a linear approximation algorithm for the max min problem is presented, which proves to be convergent in finite steps.

利用对偶原理，将双线性规划问题转化为极大极小问题，研究了该极大极小问题的线性逼近算法，并证明了该算法在有限步内收敛。

The Simulation of The Bond Surface in The Process of Bimetal Plate Rolling by R.P.FEM

刚塑性有限元法对双金属轧制结合面的模拟研究

Which blocking plate finite element analysis section, the simulation method, concluded that the edge of the blocking plate is the weakest stress.

其中堵板有限元分析小节，采用仿真模拟的方法，最终得出堵板边缘是应力最薄弱的地方。