温度的例句大全

Numerical Simulation of Temperature Field in Ceramic lined Pipe for Centrifugal SHS Process

离心SHS陶瓷衬管温度场数值模拟

The scratchpad also contains a configuration byte to set the desired resolution of the temperature to digital conversion.

便笺簿也包含一个配置字节设置温度的期望决议到数字式转换。

The computing of the unsteady temperature fields by rectangular, tetrahedron and right parallelepiped elements

用矩形、四面体和正六面体单元计算非稳定温度场

The experimental research and numerical simulation to control the temperature inside the rectangular parallelepiped below-18 ℃ by sublimation of dry ice were conducted.

对用干冰升华气体将长方体冷冻室内的温度控制在-18℃下进行了数值模拟和实验。

Temperature field is obtained by Direct Finite Difference Method ( DFOM) with parallelepiped mesh elements and the latent heat release is handled with a combination of equivalent specific heat method and temperature recovery method.

计算方法采用直交剖分的直接差分法；潜热处理采用等价比热法与温度修正法相结合的方法；

The Comparison of Land Surface Temperature with CLM and Split Window Retrieving Method

基于陆面模式和遥感技术的地表温度比较

The equivalent circuit model of the CGO film was recommended, and the complex impedance spectroscopy of the CGO film was analyzed at different test temperatures.

提出了阻抗谱的等效电路，并对不同测试温度下CGO的阻抗谱进行了分析。

The results indicated that sublimation temperature of Be ( BTZ) 2 is 317 ℃;

实验结果表明：Be（BTZ）2的升华温度为317℃；

The functions and total structure of indoor temperature control system are introduced.

介绍了室内温度控制系统的功能及整体结构,分析了主、从控制器的硬件结构.

Variational principles of smoke temperature are studied in confined space with water mist applying.

在受限空间通过模拟试验研究细水雾作用下烟气温度的变化规律.

The crystalline pattern of Chestnut starch was C and the glass transition temperature was 147.7 C.

板栗淀粉的晶型属于C型,板栗淀粉的玻璃化转变温度为147.7℃.

The influence of emulsion particle size and glass transition temperature, etc on film performances is discussed.

讨论了丙烯酸酯乳液的粒径大小、玻璃化转变温度等对涂膜性能的影响.

As heated to 200 ℃, further phase separation occurred, and the glass transition temperature shifted outward.

加热至200℃左右, 体系发生进一步的相分离, 致使玻璃化转变温度外移.

Applications: Used in air, gases, liquids, solids and surface temperature measurement.

用途: 用于空气 、 气体 、 液体 、 以及固体表面的温度测量.

Adopted sensitive micro-K thermocouple detector provides quick and accurate temperature measurement of a tip.

采用敏感的微型K热电偶传感器,准确快捷测量焊咀温度.

These quantities ary with parameters such as temperature and strain rate, further complicating the analysis.

通过进一步详细分析,这些变量随着温度和应变率的变化而变化.

In this paper, notch sensitivity of a low-carbon bainitic steel under static load has been studied.

本文研究了回火温度对 低碳 贝氏体钢静载缺口敏感性的影响.

After the wall energy unit area of high load capacity, high surface temperature, the lampdimming life.

确定后,则管壁单位面积能量负荷大, 管壁温度高, 灯管寿命低.

The complex relations of temperature field, microstructure field and stress field on quenching process are introduced.

介绍了淬火过程中温度场 、 组织场和应力场相互作用的复杂关系.

This paper describes the history and development of the temperature field and residual stress field.

本文主要讲述了有关焊接温度场与应力场的研究历史与发展.