焊的例句大全

IBM PC/ XT Interface and control circuit Used in Arc Welding Tracking System

用于弧焊跟踪的IBM Pc/XT接口及控制线路设计

The reading notes of CO_2 welding machine repair

CO2焊机维修札记

Less residue, shinny and clean solder spot.

残留物少，焊点光泽，干净。

The weak point of friction stir welding joint for 7075 aluminum alloy occurs in the TMAZ.

7075铝合金搅拌摩擦焊接头的薄弱点在热机影响区.

The automatic control system of circular seam process for non-rotated pipeline was developed in the paper.

建立了非旋转管道环缝焊接自动控制系统,并介绍了其系统结构和工作原理.

The residual stress imposes considerable negative influence on quality of the spiral welded pipe.

残余应力对螺旋焊管质量有显著影响.

Approach to formation of thin piece welding nugget vortex flow

薄件点焊熔核旋流现象的形成

A temperature field measuring system for ultrasonic plastic welding based on HP VEE

基于HP VEE的超声波塑料焊接温度场检测系统

In this paper capsule history about development of powerful CO_2 lasers and microprocessor-controlled positioning systems in China are described, and listed some examples in applications, including heat treatment, cutting and welding, and the situation of importing technology and international cooperation are introduced.

本文恼述我国中、高功率CO2激光器及加工机发展历程，列举了其在热处理、切割与焊接方面应用现状，介绍了技术引进及国际合作情况。

The formation and microstructure of intermetallic surfacing layers acquired by light beam heating Ni and Al mixed powder were investigated by means of X-ray diffraction, SEM, EDXS and microhardness.

采用X射线衍射、SEM、EDXS及显微硬度等方法，研究了光束堆焊Ni，Al混合粉末制备的金属间化合物涂层的成形和微观组织特征。

It is found that there is no welding sintering behavior due to friction between nanometer ceramic particles during explosive consolidation. This result can be used to judge the theory of the ECCP. 2.

通过研究发现，纳米陶瓷粉末颗粒在爆炸压实的条件下，不可能发生由于摩擦导致焊接的烧结行为，从而为爆炸压实烧结纳米陶瓷粉末的理论进行了澄清。

Research on DCSP TIG welding process for Al

Al的DCSP TIG焊的研究

Abstract The assessment of the integrity of structure containing defected are widely used for engineering structure Based upon the ideas of the concept of CEGB/ R6, the failure assessment curve ( FAC) of weldments is analyzed by elasto plastic finite element computations.

含缺陷结构的完整性评价是实际工程中经常遇到的问题，参照CEGB／R6的方法，用有限元对焊接接头的失效评定曲线进行了计算。

Tests show that the FCCL is excellent at flame-retardance, soldering resistance, high peel strength, low water absorption.

通过测试表明，该FCCL阻燃性能、耐锡焊性能、剥离强度高、吸水率低。

This paper presents research results on quality analysis, microstructure and properties of copper coated steel strip ( CCSS).

对双层卷焊钢管用镀铜钢带质量与组织性能进行了全面分析研究。

Thus, the properties and microstructure of copper brazed double-walled steel tube made of CCSS also come up to that of the exotic products.

并且用其制成的双层卷焊钢管组织优良、性能符合标准要求，达到了国外同类产品水平。

Effect of Solder Paste Volume on Reliability of CBGA Assemblies

焊膏厚度对CBGA组装板可靠性的影响

Reliability of CBGA soldered joint under thermal cycling

CBGA焊点热循环条件下的可靠性

Microstructure and fracture of Pb-free solder interconnects in CBGA packages under thermal cycling

CBGA结构热循环条件下无铅焊点的显微组织和断裂

Pressure on the torch and so should check whether or not to plug the gas pathway.

对等压式手轮焊炬应检查其气体通路有无堵塞.