焊接的例句大全

Weld residual stress degree of irregularity is the important influencing factor for equipment life.

金属焊接引起的残余应力分布的不均匀程度是影响设备寿命的重要因素.

A : IPC is currently working to revise the specification for inspection of lead-free solder joints.

IPC 正在修订关于无铅焊接的质检标准.

Gangqiu welding, Ju Peng, oil shed , shed C payments, the processing tank.

钢球焊接, 车棚, 油棚, C型钢棚, 油罐加工.

It outfits lathe, mill, whet, jointing and precision equipment, can supply the uniform products to customers.

本公司设备有车 、 铣 、 研磨 、 焊接及精密的测量检验设备一应俱全, 能够给客户提供始终如一的产品品质.

This paper introduces the technique for welding machine vehicle on portal jib crane.

文章介绍龙门吊小车轨道焊接工艺.

The method provides the ability to estimate the splice loss.

这种技术可以估计出焊接的损失.

This also is provides the experimental basis for the next edition welded mesh regulations revision.

这也是为下一版焊接网规程的修订提供试验依据.

Mirror the model over, weld the middle points, and then remove the middle edge ( Fig . 09 ).

镜像模型, 焊接中间的点, 然后移除中间的线.

The work principle that acquaints with to weld the special airplane can adjust also.

熟悉焊接专机的工作原理并能调整.

An ultra _ low _ loss splicing without conventional power monitoring could be achieved.

焊接最低损耗在非常规能源运作下将可能做到.

Body for the steel welded structure, with the light metal skin and hard shell-type tail beam.

机身为钢管焊接结构, 具有轻金属蒙皮和硬壳 式 尾梁.

Based on the model , a calculation system of intersecting pipe groove was developed.

该系统可计算出相交管子焊接装配所需要的所有参数.

Widely used for welding of low carbon steel, wire steel plate etc.

广泛用于低碳钢板 、 线材、不锈钢板等材料的焊接.

The residual stress in the welded plate has been measured.

最后测定了焊接板的残余应力.

The bars were welded to the deck plate.

扁钢焊接在桥面钣上.

Structure light sensor is of great importance in automatic welding.

结构光传感器是焊接自动跟踪研究的重要研究方向.

The observed friction force is the force required to break these tiny welds.

我们观察到的摩擦力,就是破坏这些细微的焊接点所需要的力.

Wwlding material: low carbon steel , high strength steel, medium carbon steel, low steel.

可焊接材料: 低碳钢 、 强度钢 、 碳钢 、 合金钢.

Ina CAPP system in process planning of welding parts and spares for heavy machine is introduced.

介绍了为重型机械专门开发的焊接零部件工艺规划CAPP系统.

Careful inspection showed that the statue's head had been cast separately and soldered in place.

仔细检查发现雕像的头部是铸好后再焊接上去的.