熔的例句大全

On Earth, andesites typically form when descending tectonic plates mix water into subterranean molten rock.

在地球上, 安山岩通常是板块的下沉使水混入地下熔融的岩石而形成.

Single crystal of Cr ~ ( 3 + ): LiCaAlF _ 6 was grown by vertical Bridgman method from stoichiometric composition melt.

用垂直Bridgman法从化学计量比组份的熔体中长出Cr~ ( 3+ ): LiCaAlF_6单晶.

This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的.

In addition, solids are apt to settle and sinter and stick on the flat bottom surface.

此外, 颗粒容易沉积,并熔结和粘贴在平底表面上.

The factors affecting the unit melt consumption were analyzed for PET staple fiber plant.

分析了影响涤纶短纤维生产装置熔体单耗的原因.

The direct melt polymerization of poly ( lactic acid-co-caprolactone ) was studied by orthogonal experiment and SPSS software.

应用正交实验及SPSS统计软件研究 聚乳酸 - 己内酯直接熔融聚合工艺.

An axisymmetric finite element electro-thermo-mechanical model for resistance spot welding process is introduced.

介绍了模拟点焊熔核形成过程的轴对称电、热、力学有限元模型.

The paper described the 3-D aligning theory of single-mode fiber fusion splicer and its align-ing methed in 3-dimension .

本文介绍了 单模光纤 熔接机 三维 自动对准原理,以及三维自动对准的实现方法.

The synthesis methods of magnesia-alumina spinel are electro-fusion and sintering process.

镁铝尖晶石的合成方法有电熔法和烧结法.

The volcano spews out molten rocks every day.

这座火山每天喷发熔岩.

Stable arc, less spatter and deep penetrationcan ensure welding quality well.

电弧稳定, 飞溅较少和熔透深,可确保焊接质量良好.

Some key factors that influence the production of melt spinning Spandex are analyzed.

分析了熔纺氨纶生产中的主要影响因素.

The thicker lava would have taken two weeks to solidify...

较厚的熔岩需要两周的时间才能凝固。

The volcanic lava solidifies as it cools.

火山熔岩冷却后变成固体。

solidified lava

固结熔岩

Formed by solidification from a molten state . Used of rocks.

由熔化的岩石凝固形成的.

Our company is the sole agent in Hunan Province of Mingrong Group.

我公司是茗熔集团在湖南省岳阳地区的签约代理商.

We fused the pipes with solders.

我们用焊锡熔接管子.

So it will result in rigidity skin & block and solder balls etc.

产生的后果是:锡膏出现硬皮 、 硬块、难熔并产生大量锡球等.

Oxide occurring after melting approximately 50 % less than common solder.

熔解后氧化物(锡渣)之发生量较一般焊锡减低近半.