熔的例句大全

The factory is R & D , production, sales, an integrated whole enterprise.

熔晖炉业是集 研发 、 生产 、 销售为一体的综合性企业.

The structure and properties of the weld fusion-zone in an aluminized article have been investigated.

研究了渗铝件焊接熔合区的组织与性能.

The metallurgical properties ( Viscosity, free running temperature etc.) of medium-content titania ( TiO 25%~ 15%) bearing blast furnace slag were systematically investigated by means of regression design of mixed burden and single component design.

采用了混料回归设计和单成分设计方法，系统地研究了中钛型高炉渣（TiO25%～15%）的粘度、熔化性温度等方面的冶金性能。

With the increasing of reduction grade the viscosity and free running temperature of slags would have rising tendency.

随着钛氧化物还原度的提高，炉渣的粘度和熔化性温度总体呈上升趋势。

Through analysing the change of the melt vapor pressure, surface tension and contact angle of the drop, we can explain the growth process of single, bundle and special morphology MgO whiskers.

通过熔体的蒸气压，液滴的表面张力和接触角的变化解释了单根、单束及特殊形貌的氧化镁晶须生长过程。

Ta and Nb possess the superiorities of high melting point, good ductibility, low vapor tension, causticity-resistant and high thermal conductivity and so on. They are the important raw materials of electronic, atomic, space navigation, steel and chemical industry, etc.

钽和铌具有熔点高，延性好，蒸气压低，耐蚀性强和热导率大等优良特性，是电子、原子能、宇宙航行、钢铁、化工等工业的重要原料。

A study of D-D fusion in TiD target induced by ￣( 197) Au bombardment

~（197）Au束轰击TiD靶引起的D&D熔合研究

A.C. Breaking-Capacity Tests on Fuses

熔断器交流分断能力试验

The results showed that the change of raw material, production load, production process parameters and other abnormal factors will do damage to the melt evenness, spinning stability and yarn quality.

研究表明：原料的改变，生产负荷的改变，生产工艺参数的改变及其他一些异常因素都会影响熔体的均匀性，纺丝的稳定性和丝的品质。

The hardness of black silicon carbide is greater than fused alumina but less than synthetic diamond.

硬度黑碳化硅大于熔融氧化铝,但少于人造金刚石.

The main material of brown fused alumina is bauxite, which is eletrically fused in high temperature.

棕刚玉是以铝矾土为主要原料,经高温熔炼而成.

Its mechanical intensity is greater than fused alumina, but is brittle and very sharp.

其力学强度大于熔融氧化铝, 但脆性也很尖锐.

The main material of brown fused alumina is bauxite, which is electrically fused in high temperature.

棕刚玉磨料以铝矾土为主要原料经高温熔炼而成.

This paper has studied the synthesis of hot-melt road marking paint using modified rosin-alkyd resin.

本论文研究了热熔型改性松香 - 醇酸树脂路标涂料的制备.

Hotmelts is a major component of EVA ( ethylene vinyl acetate copolymer ).

热熔胶的主要成分是EVA ( 乙烯醋酸乙烯共聚物 ).

The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.

研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理.

The result of abrasion-resistant experiment shows that the laser cladding layer is satisfactory.

磨损试验表明,液压泵缸体配流面的激光熔覆层满足使用要求.

A butyl rubber based adhesive for hot melt application as sealant for cavity-glass was prepared.

采用丁基橡胶研制了用于中空玻璃单道密封的热熔胶.

However the laser cladding of iron-based alloy brings some problemsas crack, oxidation , burning loss, hole.

工艺的选择等方面着手解决了铁基合金的激光熔覆中存在的容易开裂 、 容易氧化 、 容易产生气孔等问题.

Thus, this fuse has good performance and big breaking capacity.

所以, 这种熔断器性能良好,开断容量大.