熔的例句大全

The results show the strength and the dimension of spot the requirements.

试验结果表明,焊点强度满足要求,熔核尺寸符合要求.

The results show that as PEG increasing, the crystallizability and melting temperature was decreased.

实验结果表明,随PEG含量的增加, 聚合物的结晶性与熔融温度均下降.

As we all know, it has two thousand years of history that glass manufacturing has used molten technology to produce glass since the first century AD before modern technology creating original pieces of float glass.

玻璃制造业从公元一世纪利用熔融技术制造平板玻璃到现代采取浮法技术制造的原片玻璃，已有两千年的历史。

The volume reduction and innocuity realized dring incineration, the slag can be used to do material of construction.

不仅实现了垃圾的减容化、无害化，还实现了熔融渣的资源化。

Study of AgW ( 75) Electrical Contact Material With Infiltration Technology

熔渗法AgW（75）触头材料研究

Qualification and Research on the Cold Crack Sensitivity for the Fusion Zone of 9% Ni Steel Welding

9%Ni钢焊接熔合区的冷裂敏感性评定与研究

This accumulation is far out of proportion to China's 'consumption,' meaning copper that actually goes into a furnace somewhere and comes out as wire or pipe that's used for something.

这种程度的积累与中国的消费完全不成比例。所谓消费，意味着铜真的进入了熔炉，被制成铜线或铜管投入使用。

This accumulation is far out of proportion to China's "consumption," meaning copper that actually goes into a furnace somewhere and comes out as wire or pipe that's used for something.

这种程度的“积累”与中国的“消费”完全不成比例。所谓“消费”，意味着铜真的进入了熔炉，被制成铜线或铜管投入使用。

Cascade of triple-withdrawal zone-transport refiner

级联三重回收熔区传输区域精炼炉

Analysis and Characteristic on Hydraulic System of Aluminum Electrolytic Casting 50t Capsizal Furnace and Rest Furnace

铝电解铸造50吨倾翻式熔炼炉与静止炉液压系统浅析及特点

It is found that the mechanical and remelting effects coexist and promote each other in the detachment process.

研究发现，枝晶臂的断裂过程中，重熔和应力作用同时存在并相互促进。

SEM Analysis of Microstructure of the Copper Wire Melted Bead and Trace in the Fire Disaster

火灾中铜导线及其熔珠显微结构的SEM分析

The fusing current of the fuse-wire is less than the specified value of the battery, cable and connecting element in satellite.

熔断电流在星上电池、电缆及接插件的耐受范围内，因而可以在星载仪器上使用。

Fuse wire with loops for connection for use with fuses of a voltage exceeding 1000v

带连接环的熔丝，用于超过1000V电压保险丝

Every port should be equipped with switch and appropriate fuse wire, the switch of each port should be cut off before starting the machine.

每一用电端均应装有开关及适当容量的熔断丝，开车前各用电端的开关均应置于断开状态。

Study on the deposition characteristics of MAG welding of bare wire

实芯焊丝MAG焊的熔敷特性研究

The result showed that it is in the period of droplet growth at the tip of welding wire that an electrochemically gained oxygen was produced in the case of direct current negative polarity whereas an electrochemically lost oxygen in positive polarity.

结果表明，在焊丝末端熔滴生长阶段，直流反极性条件下存在电化学增氧，而直流正极性条件下则存在电化学脱氧。

Abrasive Wear Mechanism of SHS Coatings of Chromium Carbide Cermet

碳化铬SHS熔覆层的磨料磨损机理研究

Study on the Formation of the white Layer and the Melted layer in W_ ( l8) Cr_4V Steel Oil Quenched in Vacuum

W（18）Cr4V钢真空油淬白亮层、熔化层形成原因的试验研究

The glass forming region in the ( Mg _ ( 0.25 ) Ca _ ( 0.25 ) Sr _ ( 0.25 ) Ba _ ( 0.25 )) F _ 2-AlF _ 3-YF _ 3 system has been determined by quenching melts.

用熔体淬冷法确定了 ( Mg_ ( 0.25 ) Ca_ ( 0.25 ) Sr_ ( 0.25 ) Ba_ ( 0.25 ) )F_2-AlF_3-YF_3系统的玻璃形成区.