粗糙的例句大全

Also, by modem standards, the code appears crude and lacking in humanity.

而且在现代人看来, 这部法典也显得粗糙,缺乏人道.

His face was coarse-slack from illness, suffering, and absurdity.

他脸上的肌肉粗糙松弛,是病痛 、 苦难和荒唐生活造成的结果.

Grinding of Rotary Surface Composed of Discrete Points in Its Axial Section and Calculation and Analysis of Theoretical Roughness

列表轴截形回转面的磨削及理论粗糙度的计算与分析

Attenuation factor of ground wave propagation across the rough sea

随机粗糙海面上地波传播衰减因子

Atheoretical model and prediction model of surface roughness were established.

建立了表面粗糙度的理论模型和预测模型。

The asperous and granular changes had higher diagnostic value about IM, its sensitivity and specificity was 66 67% and 71 74% respectively.

镜下粗糙不平、颗粒样改变对诊断肠上皮化生的价值较大，其敏感性和特异性分别达6667%、7174%。

Application of the average flow model for power-law fluid to dynamically loaded rough journal bearing

幂律流体的平均流动模型在粗糙径向滑动轴承中的应用

Strategy for Mining of Rough Approximation Precision Data Based on Fuzzy Attribute Set

基于模糊属性集的粗糙近似精度数据挖掘策略

Then, using the theory of Gaussian surface profile assessment of the center line of information useful for isolated roughness features.

然后，利用高斯评定理论建立表面轮廓的中线信息，分离出有用的粗糙度特征。

It is obvious that the asperity size effects on the amplitude spectrum.

粗糙面的大小对振幅谱的影响不显著。

A theoretical analysis of asperity contact is conducted for rolling point contact under oil lubrication condition.

对油润滑条件下椭圆接触滚动表面的粗糙峰接触作了理论分析。

Asperity load sharing of anisotropic rough surfaces in mixed lubrication

混合润滑时各向异性粗糙表面微凸体载荷分配的研究

Numerical Analysis for Influences of Running in Process on the Lubrication Properties& Wear of Asperity and Profile

磨合过程对润滑性能影响的数值分析&粗糙峰与轮廓的磨损

Singularly Perturbed Solution of a Heavy Circular Plate Roll on the Asperity Plane Surface

重圆盘在粗糙平面上滚动时的摄动解

Numerical Analysis of the Transient Micro-EHL of Line Contact with a Single Asperity on a Surface

一个表面带单粗糙峰的线接触时变微弹流润滑数值分析

Asperity Microcontact and Its Influence on Partial Hydrodynamic Lubrication of Rough Surfaces

粗糙峰微接触及其对润滑的影响

Undoubtedly, these asperities will have remarkable influence on surface friction and subsurface stress of the contact area.

齿面粗糙峰的存在无疑会对齿面摩擦力和轮齿接触区次表面应力分布产生重大影响。

Far-field body-wave radiation of the fault which contains asperities

含粗糙面断层的远场体波辐射

The larger the surface roughness and the sharper the asperities, the greater the asperity contact load.

表面越粗糙、表面凸峰越尖锐，微峰接触载荷则越大。

The highest temperature of asperities is much higher than that of worn plane, which is one of the main factors in leading to stress graphitization on worn surface.

摩擦过程中粗糙表面微凸体的最高温度远大于摩擦平面，瞬时的高温和摩擦剪切力的作用使微凸体被应力石墨化。