缺口的例句大全

Causes of DWTT specimen failure for medium thickness pipe are material brittleness addition and V-shape nick.

简单分析了中厚壁钢管产生DWTT无效试样的原因是材料脆性增加和试样V形缺口.

Edge tearing resistance: Resistance of paper to develop an edge tear.

纸边抗撕度: 纸张边缘对形成撕裂缺口的抗力.

TEM and SEM analysis showed that the phase structure of AEMS and AOMS were co-continue structure and the toughening machenism was severe shear yielding when the blends reached their highest notched Izod impact strength.

TEM和SEM分析表明，缺口冲击强度达到最高值的AEMS和AOMS，其相结构为近连续相结构，增韧机理为剪切屈服机理。

The huge waves made a breach in the sea wall.

大浪在堤上冲出一个缺口.

The waves made a breach in the sea wall.

海浪将防波堤冲开一个缺口.

The waves made a breach sea wall.

海浪将防波堤冲开一个“缺口”.

Because of the spiraling costs, the World Food Program says its original budget for this year is not enough to feed all the hungry.

由于粮价上涨，世界粮食计划署宣布本财年预算出现资金缺口，无法为所有的饥民提供食物。

Yes, the blade is chipped in a few places.

是的, 刀锋有几个地方缺口.

Advantage: Not easily occurred a crack, gap and collapse during the cutting.

优点: 切割加工时不易产生裂角 、 缺口、崩裂现象.

This gap of leadership allowed two directors, Heidegger and Scarlet , to seize control of the Company.

这个缺口使得两位董事会成员独揽公司大权, 即海德格尔(Heidegger)和绯红(Scarlet).

Driven gap disc cutting mechanism for treating corn stalk and rootstalk

驱动缺口圆盘玉米秸秆根茬切断装置的研究

Make sure the rectangular indentations on the synchroniser ring are positioned correctly with respect to the guide sleeve.

务必确保同步器环上的矩形缺口相对于导套的位置正确。

A shallow notch, cut , or indentation on a surface.

表面上的较浅的刻槽 、 刻痕或缺口.

In situ nick translation method reveals the antimutagenic effect of the total saponins of Cimicifuga dahurica

原位缺口翻译技术检测兴安升麻总皂甙的抗突变作用

Results show that a small amount of Mg and Zr can improve neither HCF properties nor fatigue notch sensitivity.

结果表明，微量元素Mg、Zr对提高疲劳性能不显著，也不能改善疲劳缺口敏感性。

Two kinds of surface notch : rectangular and circular arc profiles liave been tested.

试验了两种即矩形和圆弧形剖面的表面缺口试样.

Numerical Analysis of Strain-Rate Field Below Notch Root of the Charpy V-Notched ( CVN) Specimen

冲击加载时CVN试样缺口前沿应变速率分布特性的数值分析

There is a linear relationship between boron content and toughness. The boron content must be controlled below 0.0020% in order to make AKV ≥ 50J. A discussion was made on the cause of influence of boron on the low temperature toughness.

为了使-20℃的V型缺口试样冲击功A（Kv）≥50J，必须将酸溶硼含量控制在0.0020%以下，分析了硼影响韧性的原因。

In this paper, notch sensitivity of a low-carbon bainitic steel under static load has been studied.

本文研究了回火温度对 低碳 贝氏体钢静载缺口敏感性的影响.

The children climbed through a hole in the fence.

孩子们从栅栏的缺口处爬了过去。