聚合的例句大全

The industrial field test of polymer flooding in Duanxi of block Beiyi, Daqing oil field is currently a tertiary enhanced oil recovery project with the largest scale and longest period in China.

“北一区断西聚合物驱油工业性矿场试验”是我国目前规模最大，周期最长的三次采油矿场试验项目。

Polymerization of Methyl Methacrylate by Copper ( I) Tert-Butoxide

叔丁醇亚铜催化甲基丙烯酸甲酯聚合

Ethanol was a good solvent for Eudragit RS by investigating solubility parameter ( 5) and water permeability;

通过测定聚合物溶度参数及透湿性，确定乙醇为良溶剂；

In the process of wastewater treatment, biofilm detachment in an anaerobic fluidized bed with polymer porous carriers ( WAR-8-8) has been studied, and the concentration has been put on the factors influencing biofilm detachment and biofilm detachment process.

研究了聚合物多孔载体（WAR-8-8）厌氧流化床处理废水过程中影响生物膜脱落的因素以及生物膜的脱膜过程。

Absorbent resin JT-1 is synthesized by using structural strengthening agent and acrylamide.

利用含有吸附基团的结构增强剂与丙烯酰胺等单体共聚,合成了吸水树脂JT-1.

The International Organization for Standardization ( ISO) has specified the determination of the viscosity number in dilute solution of methyl methacrylate ( MMA) polymer for moulding and extrusion.

国际标准化组织（ISO）规定了甲基丙烯酸甲酯聚合物模塑和挤出材料的稀溶液粘数的测定。

EOR is considered as an important technology for the strategic development of offshore oilfields in China.

摘要在我国海上油田实施聚合物驱提高采收率是一项其有战略意义的举措,对于海洋石油的发展具有重要意义.

The photopolymerization of aerylamide ( AM ) initiated with N, N-dimethyltoluidine ( DMT ) has been studied.

研究了N, N - 二甲基对甲苯胺 ( DMT ) 为引发剂时丙烯酰胺 ( AM ) 的光聚合.

The rate of polymerization is proportional to 1.62 power of [ AN ] and 0.62 power of [ DMT ] .

聚合速度与AN浓度 的1.62次方、DMT浓度的 0.62 次方成正比.

Consequently, the homogeneous air-DBD used to modify surface properties should be researched from now on.

所以以后工作的努力方向是致力于研究大气压下均匀的空气DBD改性聚合物.

A dynamic aggregation model of AOP based on CAR system was presented.

基于CAR构件 系统,提出了AOP的动态聚合模型及其实现.

The second aggregation function is applied to the partially calculated results of S1.

第二个聚合函数应用于S1的部分计算结果。

A research is madethe production process of the high NV reactive acrylic resin by solution polymerization.

采用溶液聚合研究了高固含量反应性丙烯酸酯树脂的制造工艺.

The preparation of new chemically active and bioactive polymers.

新型化学活性与生物活性聚合物的制备。

This phenomenon may be used as a probe for studying the process of photo-induced initiated cationic polymerization of BVE.

因此利用这一现象作为荧光探针，考察了氧鎓盐光引发BVE的阳离子聚合过程。

Photo-initiated cationic polymerization of butyl vinyl ether ( bve) by pyrylium salts

利用荧光探针技术研究氧鎓盐光引发丁基乙烯基醚的阳离子聚合

The organic BPG and the polymer were used to prevent the formation from mud making, and to improve shearing-thinning ability of the fluid;

用有机黑色正电胶和聚合物控制地层造浆，提高钻井液的剪切稀释能力；

The results showed that the Ammonium Ceric Nitrate used as initiator is high effective, the rate of polymerization reaction is satisfactory and the capacity of water-absorption for the resin is high.

结果表明：硝酸铈铵引发剂的引发效率高，聚合速度快，树脂的吸水能力强。

The chemotactic peptide N-formyl-met-leu-phe ( fMLP) is known to induce various responses in neutrophils, including superoxide production catalyzed by NADPH oxidase, migration and actin polymerization.

趋化肽N-甲酰-甲硫氨酰-亮氨酰苯丙氨酸（fMLP）能够诱导中性粒细胞发生多种生物学反应，包括NADPH氧化酶催化的过氧化物生成、游走、肌动蛋白聚合等。

It's especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers.

JH-S69 最适用于在含双键聚合物或其共混物中采用含羟基填料的橡胶配方.