蚀的例句大全

Abrasion also abets wind erosion. This analysis is helpful to the research of derailment and abrasion machenism.

磨损作用也助长了风的侵蚀。该分析有助于脱轨和磨耗机理的探讨。

Method of Impulse Measurement for Laser-Ablated Target

用于测量激光烧蚀下靶材获得冲量的方法

Temperature and mechanics effect measurement of plasma induced by laser ablating hard aluminum

激光烧蚀硬铝产生等离子体温度和力学效应测量

The plasma properties of laser ablated metal target in air

脉冲激光烧蚀空气中金属靶产生等离子体的性质

An experimental research and analysis of flowing patterns on ablating shapes

烧蚀形状的实验研究与流态分析

Research on the relation between the ablating rate and surface heating power

固体烧蚀速率与表面加热功率关系的探讨

Effect of light field force on transportation behavior of ablated materials

光场力对烧蚀物时空分布的影响

Laser marking is a kind of technique using heat effect of laser to ablate meterials on object surface so as to leave over permanent press.

激光打标是利用激光的热效应烧蚀掉物体表面材料从而留下永久标记的技术。

Effect of graphitization degree on the arc ablate rate of different cabon slide materials

炭滑板的石墨化度对电弧烧蚀速率的影响

Behavior of the ablative deformation of resin matrix materials at high temperature

树脂基材料的高温烧蚀变形

Study on the Test of Smoke Signal of Ablative Material

烧蚀材料烟雾信号测试研究

Study on factors affecting ablative performance of c/ c Composites

炭/炭复合材料烧蚀性能影响因素分析

Ceramics tile are widely used because they have many good characteristics sue has heat-resistance, abrasion hardness, wear-resistance, acid-proof, low-expansion and low-price.

陶瓷玻化砖具有耐高温、高硬度、耐磨损、耐腐蚀、低膨胀系数、价格便宜等特点，因而其用途非常广泛。

Fiberglass-Reinforced Plastic ( FRP) made from Epoxy Vinyl Ester Resin will be compared to acid brick and rubber-lined carbon steel and high alloy clad carbon steel as well as resin coated carbon steel in corrosive flue gas applications.

本文比较了环氧乙烯基玻璃钢（FRP）与碳钢衬耐酸砖和衬橡胶、碳钢覆合高镍合金以及碳钢衬树脂胶泥在腐蚀性烟气方面的应用。

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。

An atmospheric corrosion accelerated test apparatus for oxidation studies of uranium

用于大气腐蚀加速试验的氧化研究仪

Treatment of Scaling and Corrosion of Nitrogen Gas-Water Pre cooling Tower

氮水预冷塔结垢及腐蚀问题的处理

Having been modified, water was slowed down corrosion and scale buildup and reduced treatment cost and environmental pollution. Also, water absorbing condition of injection well was improved and waterflooding producing reserves of oil field were increased.

改性处理后的水不仅提高了水质，减缓了腐蚀和结垢，降低了污水处理成本，减少了对环境的污染，而且还改善了注水井的吸水状况，增加了油田水驱动用储量。

Design of abrasion tester and its data processing system

磨蚀实验台及其数据处理系统的设计

Gray spot; the toughness matching between base metal and weld; lamination and seperation of steel and abrasion hardness, etc.

内容包括焊缝沟腐蚀问题、灰斑问题、母材与焊缝的韧性匹配问题，钢材分层及断口分离问题以及硬度偏低引起的耐磨性问题等。