蚀的例句大全

Amorphous beryllium hydride, as ablator, can increase conversion from laser to X-rays.

非晶BeH2材料作为烧蚀层，掺入高Z元素后可以提高激光-X光的转换效率。

In chapter five, the results of the experiments are analysed, we draw a conclusion that the thickness of ablator should try to reach the critical thickness.

第五章是实验结果和分析，最终得出了烧蚀层厚度应当尽量达到临界厚度的结论。

The flyer design emphasizes conceptually and physically separate functions of light collection at a distance from the laser source, light concentration on the ablator, and autonomous steering.

飞行器草图强调了概念上和物理上各自的功能&从远距离的激光源收集激光、光集中在烧蚀材料上和自主操纵方向。

At last, the results of the theory, the numerical simulation and the experiments are summarized. It is concluded that the thickness of the ablator should try to reach the critical thickness.

最后，我们总结了理论、数值模拟和实验三方面的结果，提出了在不出现严重二维效应和卸载波效应的前提下，烧蚀层厚度应当达到临界厚度的设计原则。

Finally, we test the velocities of three flyers with ablator of different thickness, the result indicates that we can measure the velocities of flyer which can further calculate the released particle velocities, and validate the verdict of theory and simulation.

最后，实验实测了三种烧蚀层厚度不同的飞片的飞行速度，结果表明飞片法可以测得飞片速度，进而求解粒子速度，而且证实了理论和数值模拟的结论。

Research and development of ablative performance of C/ C composites

C/C复合材料烧蚀性能的研究进展

Study on factors affecting ablative performance of c/ c Composites

炭/炭复合材料烧蚀性能影响因素分析

Study on the Test of Smoke Signal of Ablative Material

烧蚀材料烟雾信号测试研究

Behavior of the ablative deformation of resin matrix materials at high temperature

树脂基材料的高温烧蚀变形

Effect of graphitization degree on the arc ablate rate of different cabon slide materials

炭滑板的石墨化度对电弧烧蚀速率的影响

Laser marking is a kind of technique using heat effect of laser to ablate meterials on object surface so as to leave over permanent press.

激光打标是利用激光的热效应烧蚀掉物体表面材料从而留下永久标记的技术。

Effect of light field force on transportation behavior of ablated materials

光场力对烧蚀物时空分布的影响

Research on the relation between the ablating rate and surface heating power

固体烧蚀速率与表面加热功率关系的探讨

An experimental research and analysis of flowing patterns on ablating shapes

烧蚀形状的实验研究与流态分析

The plasma properties of laser ablated metal target in air

脉冲激光烧蚀空气中金属靶产生等离子体的性质

Temperature and mechanics effect measurement of plasma induced by laser ablating hard aluminum

激光烧蚀硬铝产生等离子体温度和力学效应测量

Method of Impulse Measurement for Laser-Ablated Target

用于测量激光烧蚀下靶材获得冲量的方法

Abrasion also abets wind erosion. This analysis is helpful to the research of derailment and abrasion machenism.

磨损作用也助长了风的侵蚀。该分析有助于脱轨和磨耗机理的探讨。

Detecting and Control of Hydrogen Corrosion to Waterwall of Boiler

锅炉水冷壁氢脆腐蚀的检测与控制

The anode corrosion rate by electrolytic polarization is dependent on the condition of test.

电解极化条件下的腐蚀结果与不同的试验条件相关。