进行的例句大全

Numerical simulations were carried out to investigate the in-furnace combustion parameters at 1000/ 0 BMCR ( boiler maximum continuous rating) load of pre-and post-retrofit cases.

用数值模拟的方法对改造前和改造方案在10000/BMCR负荷下的炉内燃烧参数进行研究。

Xylene ammoxidation Catalysts were prepared by using different pretreatment methods of catalyst carrier and different soak conditions of active components, and the catalytic property was studied by boiling bed reaction. Based on many useful information, the optimal preparation methods and factors was obtained.

采用不同的载体处理方法和活性组分浸渍条件制备了二甲苯氨氧化反应催化剂，并用沸腾床反应对催化剂性能进行比较研究，得到了较佳的制备方法与条件。

The reason why it is named fin is that it can be used to enhance heat transfer as a newtype fin, such as enhancing heat exchanger burner, obtaining heat from boiling bed, strengthening condenser of splitting decomposition and cooling high temperature mineral etc.

之所以称之为翅是因为它以一种翅片形式引入到空间表面进行强化换热，如可用于高温沸腾床内取热、急冷换热器、高温矿物的冷却等。

Base on the analysis of water deposit stick to the outside wall of tubes of transforming gas heat recovery boiler study the problem in chemical cleaning process as well as make a proposal that residual boiling stone should be converted into another type and do alkali cleaning properly.

通过对制氢转化气余热锅炉管束外的垢样分析以及对化学清洗中存在问题的探讨，提出对残垢进行碱煮转型后，适时采取酸洗的建议。

Grey system theory is applied to analyze the experimental data of onset of nuclear boiling in Freon natural circulation.

运用灰色系统理论对以氟利昂为工质的自然循环过冷沸腾起始点实验结果进行分析。

In this article we emphasize on the analysis and research on the white bole and polymer's mixing to get the functional material on the basis of summarizing the present of it.

我们在总结了现有状况的基础上，着重对白泥与聚合物共混制功能材料方面进行了相应的分析和研究。

Studies on applying the time series analyses as a means for moderately long term prediction of pink bollworm population

应用时间序列分析法进行棉红铃虫中长期数值预报的研究

In this paper, the load which the bolster plates transmit in hydraulic press are analyzed by finite element method with plane stress elements. The results of calculation show the effect of bolster plate height and load area on transmission of load.

采用平面应力单元，对水压机加载时垫板对载荷的传递进行了有限元分析，得到了垫板高度以及加载区域对力的传递的影响规律。

The basic principle of Wafer bonder is to require bonding material applied a series of external conditions, such as pressure, temperature, environment, voltage.

晶圆键合机的基本原理是对需要键合的材料施加一系列的外部条件，比如压力、温度、环境、电压，不同的外部条件可以用来进行不同材料和结构的键合。

Methods Twenty sides of 10 adult cadaver heads fixed in formalin were used, the anatomy of the bony labyrinth and the relationship of the correlative structures were observed and measured, and meanwhile the actual surgical procedure was mimicked under the surgical microscope.

方法模拟幕上下联合经岩骨入路的手术操作，在手术显微镜下对10具（20侧）福尔马林固定的成人带颈头颅标本进行解剖，并观测骨迷路及其与重要结构间的解剖关系。

At last the weight of bone ash and calcium content were measured.

最后进行灰重及骨钙含量的测定。

Analyse the application of visual system in COG bonding machine.

针对视觉系统在全自动COG热压焊机中的应用进行分析。

In order to enhance the welding speed of microcircuit chips, the control software algorithm for the bonding machine was optimized.

为了提高生产微电路芯片的焊接速度，我们对超声波焊接机工业控制软件的算法进行部分优化。

In order to meet the industrialized requirement, the explosive bonding for large and thick stainless steel with billet was experimentally investigated.

为了满足爆炸复合-轧制一体化技术的产业化要求，该文成功地进行了不锈钢/普碳钢大型厚板坯（复板厚20mm）的爆炸复合试验。

The explosive bonding parameters were calculated and optimized before experiment.

试验前，首先对爆炸复合参数进行了计算和优化设计。

This paper introduces how to recognize and locate the bonding pad from a silicon chip image with the method of Digital Image Processing and Pattern Recognition.

介绍了采用图像处理和模式识别的方法对一幅半导体芯片的图像进行焊盘的识别和定位。

The influence of junction area and bonding pad size on the dark current has been also analyzed.

文中还对器件结面积和电极尺寸等对暗电流的影响进行了比较和分析。

Several cases of roof bolting application in various mining and geological conditions were described.

在不同的采矿地质条件下，进行了多种顶板锚固应用研究。

Healthy rabbits were injected contrast agent at ear by intravenous bolus injection of the albumin targeted and non targeted ultrasound contrast agent in a dose of 0.04 ml/ kg, respectively.

经耳缘静脉团注0.04ml/kg的白蛋白超声造影剂进行超声造影，分为靶向组（20只）和非靶向组（10只）；

Twenty minutes after a single bolus dose, it may be unnecessary to antagonize the block when the train-of-four has returned to normal and fade is not present to a tetanic stimulus.

单次用药20分钟后，当四个成串刺激恢复正常和强直刺激消退后，没有必要再进行拮抗。