进行的例句大全

The algorithm was programmed in MATLAB, and tested with a benchmark problem.

最后用MATLAB编程并用测例进行了测试。

The code for these examples is based on the benchmark program I used in the preceding article, with some simplifications.

这些示例的代码是以我在上篇文章中使用的基准程序为基础的，并进行了一些简化。

The methods of compressing strain energy and bending strain energy are adopted to study low temperature performance of montmorillonite modified asphalt with two different montmorillonites by indoo.

通过两种武汉市售蒙脱土和实验室纯化蒙脱土，采用压缩应变能、弯曲应变能的方法，进行蒙脱土改性沥青低温性能研究。

It gave the detail about analyses of bending deflection and strength, compared the results with other methods.

在此基础上，详细分析计算了梁的弯曲变形和弯曲强度，并与采用其他方法得到的结果进行了比较。

The trustee trust benefits to the beneficiary for investment, already can will as an obligation, but change an Angle consideration, it is also the trustee of a right.

受托人为了受益人的信托利益而进行投资，既可以将之看作是一项义务，但是换个角度考虑，这亦是受托人的一项权利。

Its appearance and development will definitely bring nations into another round of tax benefit competition.

它的出现和蓬勃发展将会使各国因为税收利益而进行新一轮的争夺之战。

This article measures the improvements in the structure of stretching channel and its distribution by means of taking the channel in position, covering friction, controlling the length of the cable and bent of bar in post-tensioned concrete girder.

对后张法预应力钢筋混凝土梁张拉孔道的构造与布局、保证孔道准确的措施、孔道摩阻和钢丝束伸长量以及钢筋构造等，进行简要论述。

At first, utilized ANSYS to analyze the anchorage zone on the cable bent tower and investigate stress distribution and deformation at the area.

首先利用ANSYS软件针对索塔锚固区所选节段进行了详尽的空间有限元分析，考察索塔锚固区的应力分布和变形情况。

So the construction of the concrete cable bent tower becomes one of the key technologies in the construction of long-span bridges. It is necessary to study the construction technology of concrete cable bent tower s.

因此，索塔施工成为大跨度桥梁施工的关键技术之一，有必要对混凝土索塔施工技术进行研究。

The present study is to investigate the differences of mercury contents among four species of benthic fishes collected from four sample localities in the middle upper reaches of Wujiang River in the paper.

以乌江中上游设置的4个采样点所采集的4种底栖性鱼类为材料，进行取样测试，研究了鱼体含汞量差异。

Besides, the immobilization culture of benthic diatom, germplasm conservation and algal-bacterial co-immobilization with the embedding techniques were researched.

另外，通过固定化包埋技术，对底栖硅藻固定化培养、种质保存以及藻菌共固定化培养进行了初步研究。

The effect of solid-liquid ratio, cooking temperature and time on the nutrition and flavor of the boiled and autoclaved fish soup were investigated.

研究了料水比、熬制温度和熬制时间对常压熬制和高压熬制的鱼骨汤营养和风味的影响并对熬制工艺进行了优化。

In this paper, the load which the bolster plates transmit in hydraulic press are analyzed by finite element method with plane stress elements. The results of calculation show the effect of bolster plate height and load area on transmission of load.

采用平面应力单元，对水压机加载时垫板对载荷的传递进行了有限元分析，得到了垫板高度以及加载区域对力的传递的影响规律。

Studies on applying the time series analyses as a means for moderately long term prediction of pink bollworm population

应用时间序列分析法进行棉红铃虫中长期数值预报的研究

In this article we emphasize on the analysis and research on the white bole and polymer's mixing to get the functional material on the basis of summarizing the present of it.

我们在总结了现有状况的基础上，着重对白泥与聚合物共混制功能材料方面进行了相应的分析和研究。

Grey system theory is applied to analyze the experimental data of onset of nuclear boiling in Freon natural circulation.

运用灰色系统理论对以氟利昂为工质的自然循环过冷沸腾起始点实验结果进行分析。

Base on the analysis of water deposit stick to the outside wall of tubes of transforming gas heat recovery boiler study the problem in chemical cleaning process as well as make a proposal that residual boiling stone should be converted into another type and do alkali cleaning properly.

通过对制氢转化气余热锅炉管束外的垢样分析以及对化学清洗中存在问题的探讨，提出对残垢进行碱煮转型后，适时采取酸洗的建议。

The reason why it is named fin is that it can be used to enhance heat transfer as a newtype fin, such as enhancing heat exchanger burner, obtaining heat from boiling bed, strengthening condenser of splitting decomposition and cooling high temperature mineral etc.

之所以称之为翅是因为它以一种翅片形式引入到空间表面进行强化换热，如可用于高温沸腾床内取热、急冷换热器、高温矿物的冷却等。

Xylene ammoxidation Catalysts were prepared by using different pretreatment methods of catalyst carrier and different soak conditions of active components, and the catalytic property was studied by boiling bed reaction. Based on many useful information, the optimal preparation methods and factors was obtained.

采用不同的载体处理方法和活性组分浸渍条件制备了二甲苯氨氧化反应催化剂，并用沸腾床反应对催化剂性能进行比较研究，得到了较佳的制备方法与条件。

Numerical simulations were carried out to investigate the in-furnace combustion parameters at 1000/ 0 BMCR ( boiler maximum continuous rating) load of pre-and post-retrofit cases.

用数值模拟的方法对改造前和改造方案在10000/BMCR负荷下的炉内燃烧参数进行研究。