限的例句大全

Calculation of Limit strain for Textured Sheet during Biaxial Stretching

织构板料双向拉伸成型极限的计算

A method is proposed to calculate the limit strain of textured sheet in biaxial stretching.

提出了按M-K理论计算织构板料双向拉伸成型极限的方法。

Experimental Limit Load Research and Stress Analysis to the Specimen with Part-through Slot under Biaxial Load

带凹坑双向试板的实验应力分析及实验极限载荷研究

The high level alarm of bilge tank is not working properly.

污水井限量报警装置不能正常工作。

This paper proposes a generalized bilinear programming model for index tracking problem with transaction costs, rebalance and holding constraints.

本文对指数跟踪问题建立了一种广义的双线性规划模型，其中考虑了交易费用、持仓限制与重平衡问题。

The bilinear programming is converted into a max min problem on the principle of duality, and a linear approximation algorithm for the max min problem is presented, which proves to be convergent in finite steps.

利用对偶原理，将双线性规划问题转化为极大极小问题，研究了该极大极小问题的线性逼近算法，并证明了该算法在有限步内收敛。

The forming limit of forward extrusion and cross rolling tube billet

管坯正挤&横轧的成形极限

Significant improvements in output capacity and in conversion costs are achieved when rolling a billet of infinite length obtained.

当轧制一根由许多钢坯焊成的无限长钢坯时，就会大大地提高产量、降低成本。

The unit pressure in backward extruding hollow billet has been calculated by the slip line method and the upper bound method.

本文对空心件反挤的单位挤压力，采用滑移线法和上限法进行了计算。

The Simulation of The Bond Surface in The Process of Bimetal Plate Rolling by R.P.FEM

刚塑性有限元法对双金属轧制结合面的模拟研究

The manufacture craft of stainless clad strip which is belong to bimetal composite plate is carried out in this paper, and the hot-rolled process of stainless clad strip is simulated using the large finite-element software MARC.

本文利用大型有限元软件MARC模拟了不锈钢复合板的热轧过程，并讨论了不锈钢复合板轧制过程最佳相对压下量问题。

Finite element analysis of drawing of the bimetal sheet

双金属板拉延成形的有限元分析

In this paper, the end binding ring of generator rotor is designed and the primary prestress effect is analyzed under the limitation of the maxium space size. And the special binding ring manufacturing technology is also presented and implemented.

在空间尺寸极大限制条件下，对发电机转子绕组端部绑扎环进行了设计并进行了初步的预应力效果分析，提出并实施了特殊绑扎环制造技术。

In the process of continuous micro-line blocks machining, the feedrate at the corner formed by two adjacent lines is under various restrictions.

在空间小线段连续加工中，相邻线段拐角处的衔接速度受诸多因素的限制。

Results According to SF-36, patients in group A had significantly higher scores in bodily pain, emotional well-being and role limitations caused by emotional problems, than those in group B ( P all < 0.05).

结果A组患者的生活质量评分高于B组，尤其在躯体痛苦、情感问题所导致的角色限制和情感健康三项指标中差异显著（P均<0.05）。

CHF patients HRQOL scores in eight dimensions of SF-36 were significantly lower than those of general population and reduced to 30.7%-52.3%, especially in physical function, role physical and bodily pain.

心衰患者的HRQOL在各维度得分均显著低于一般人群，减少达30.7%～52.3%，其中以生理功能、生理角色限制及躯体疼痛维度最为明显。

Image Blurring Allowance of Digital Intensity Correlation Metering in the Case of Slant Optical Axis

斜光轴数字强度相关计量的像模糊容限

Three dimensional finite element analysis of a 1000 blooming mill stand

1000初轧机机架的三维有限元分析

But others, most obviously the US and European "gold bloc" countries, were sharply constrained in their ability to adjust their currencies.

但其它国家尤其是美国和欧洲“金本位集团”国家调整本币汇率的能力严重受限。

VBI ( Vertical Blanking Interval) is a part of the limited resource of television, in which various digital signals can be inserted.

场消隐期作为电视有限资源的一部分，在其空余资源中可插入多种形式的数字信号，其开发潜力正逐渐为人们所重视。