陶瓷的例句大全

An Investigation on Critical Grit Size of Chromium Carbide Cermet Formed by SHS Using Microcomputer to Measure the Grit Size

碳化铬金属陶瓷临界磨粒尺寸效应的研究应用微机检测磨料粒度组成

New Development of Functionally Gradient Cemented Carbide and Cermet

功能梯度硬质合金和金属陶瓷材料研究的新进展

In this paper, the recent developments of gradient cemented carbide and cermet are reviewed, with emphasis on their manufacturing processing, properties, and typical applications.

综述了国内外梯度硬质合金和金属陶瓷材料研究的进展情况，重点介绍了其粉末冶金制造方法、性能特征和典型应用开发。

Tungsten carbide/ cobalt cermet coatings deposited by thermal spraying have been widely used in various areas to enhance the wear resistance of many types of engineering components.

热喷涂传统碳化钨/钴金属陶瓷作为耐磨涂层已得到广泛的应用。

Research on Microwave Sintering Technology of Cermet Material

微波烧结金属陶瓷材料的工艺研究

Study on the Tribological Properties of WC-Ni-Co-Mo-PbO High-Temperature Self-Lubricating Cermet Material

碳化钨－镍－钴－钼－氧化铅系高温自润滑金属陶瓷材料的综合性能研究

Study on the Tribological Properties of SiC Ni Co Mo PbO High Temperature Self Lubricating Cermet Material

SiC-Ni-Co-Mo-PbO系高温自润滑金属基陶瓷材料摩擦学性能的试验研究

Research on Wear Resistance of Cermet Cladding Material

金属陶瓷硬质涂覆层材料耐磨损性能研究现状

Research on Equivalent Bending Strength of Cermet Cladding Material for Clad in Press Condition

金属陶瓷硬质覆层材料覆层受压时的等效抗弯强度研究

The technology of AlN ceramic substrate volume production is introduced in this paper.

文章主要介绍氮化铝陶瓷基片生产的关键技术.

Solvents and chemicals industries, plastics industry, ceramics and refractory materials.

溶剂及化学工业 、 塑胶业 、 陶瓷及耐火材料等.

KSD 302 is kick, automatic reset and of ceramics.

KSD302系列为突跳式陶瓷为主体, 自动复位形式.

Fiberfrax LDS and LDS-AL moldables consist of Fiberfrax ceramic fibers dispersed in a sticky water-based refractorybinder.

FiberfraxLDS与LDS-AL非凝固胶体是分散在粘性 水基 耐火粘合剂中的Fiberfrax陶瓷纤维材料.

The CIC reduces the TCE of the PWB to match that of the ceramic.

铜—殷钢—铜减小了印制板的热膨胀系数,使它与陶瓷的热膨胀系数相匹配.

Methods MSJ, UHMWPE and alumina ceramic wear debris are produced in vitro, while the wear debris of titanium alloy ( Ti6Al4V) is isolated from synovial membrane like interface tissue ( SMLIT).

方法将镁硅玉、高分子聚乙烯和氧化铝陶瓷在体外加工成直径小于10微米的磨损颗粒，钛合金（Ti6Al4V）磨损颗粒为界膜中提取。

Study and implementation of Fe_3Al/ Al_2O_3 ceramic based composite material design expert system prototype

陶瓷基复合材料（Fe3Al/Al2O3）设计专家系统原型的研究与实现

The material design is the first problem to be solved in the process of developing the ceramic matrix composites.

在陶瓷基复合材料研制过程中，材料设计是必须首先解决的问题。

Machinability evaluation, the connection between material design and mechanical processing, is the key of machining technology.

作为材料设计与机械加工之间的连接纽带，材料的可加工性是研究陶瓷材料加工工艺性的基础性核心技术。

Glass based ceramic lined steel pipe without compression crack was made by a SHS centrifugal process.

用自蔓延离心法制备了无压裂纹的玻璃基陶瓷内衬钢管.

TiB 2-Al 2 O 3 Multiphase ceramics with Y 2 O 3-La 2 O 3 as sintering aids are fabricated by hot pressing.

本文以Y2O3-La2O3为烧结助剂,通过热压烧结制备了TiB2-Al2O3复相陶瓷,研究了原料组成对材料的显微结构和力学性能的影响.