高温的例句大全

At warmer temperatures, nucleic acids unravel and cell membranes quickly dissolve.

在更高温度下, 核酸会散开,细胞膜也会迅速溶解.

Nuclear Fuel Cycle of three HTGR fuels has been studied.

研究了高温气冷堆三种燃料(MO20,SB20,MO93)的核燃料循环.

An advanced niobium-silicide based ultrahigh temperature alloy was prepared by vacuum consumable arc-melting method.

本文设计了新型 Nb 硅化物基超高温合金的成分,并采用真空自耗电弧熔炼法制备了其母合金锭.

This is a very important strengthening mechanism of Mg in Ni-base superalloys.

这是Mg强化时效Ni基高温合金的一项十分重要的机制.

Several protective devices adopted : alarm for open circuit of thermocouple, alarm for overheat and overloading protect.

设有热电偶断偶报警 、 高温报警、过载保护多种安全保护.

Press the mixture onto the bread and bake in a hot oven for ten minutes.

把混合料抹在面包上,然后在烤箱内高温烘烤10分钟。

Design a high temperature molten metal viscometer based on oscillating-cup method.

基于振荡杯法设计了一台高温液态金属粘度计.

A high temperature in situ observation method has been newly differential interference microscope ( DIM ) with the Schlieren method.

本文提供了实时观察高温熔体晶体生长的新方法.

Be sure the RED reset button ( High Limit Control ) is properly set: push in firmly reset.

确保红色重置按钮 ( 高温限制控制器 ) 被正确设置: 如果需要重置,请使劲按一下重置按钮.

Besides , the EPM of MA 737 cancer cell was decreased with prolongation of heating time.

研究还发现, MA737癌细胞的热敏性比相应的正常细胞强,随高温受热时间的延长,癌细胞的EPM呈 下降趋势.

The prefabricated parts can also be made.

高温热风管道内衬,加热炉内衬等部位,可制成预制构件.

Adopted liquid polysulfide prepolymer cured at high temperature for sealing cap at the first time.

首次采用液体聚硫橡胶制成预聚体再高温硫化成型,压制新型聚硫橡胶密封帽制品.

The high temperature ball valve seat material of choice for digital polystyrene or metal materials.

高温球阀的阀座材料可选用对位聚苯或金属材料.

It was hot work, so after an hour we plunked ourselves down in a shade.

这是高温作业, 所以一小时后我们找了一块阴凉地一屁股坐下去了.

Moreover, the high temperature plasticity increase with the strain rate.

此外该合金的高温塑性亦随应变速率的增大而增加.

The erosion tests at elevated temperature show that coating's erosion behavior is between plasticity and fragility.

高温冲蚀磨损试验表明,各涂层的冲蚀磨损行为介于塑性与脆性冲蚀之间,并以塑性磨损为主.

Preserved method : Avoids putting in the high temperature, moist and sunlight perpendicular incidence place, seal preservation.

保存方法: 避免置于高温, 潮湿及日光直射处, 密封保存.

The highest permissible temperature in the cavity for charging is + 50 ℃.

装药时药室中允许的最高温度为正50度.

Heat the percolator over high heat until coffee is seen perking in the clear knob.

该过滤器的热高温,直到咖啡是运输署在明确旋钮.

This perforating fluid system is solid-free, high temperature resistant, stable, compatible, and not polluting.

该射孔液体系具有无固相 、 抗高温、密度可调 、 稳定性强 、 配伍性好 、 对环境无污染等优点.