It is pointed out that the development of higher power fundamental mode CO2 laser by means of the waveguide effect of the discharging tube is a new hopeful way.

ESR study for the influence of the discharging tube diameter and moisture content upon the active radicals produced in microwave discharge of fatty ether

放电管直径和水含量对脂肪醚气相微波放电分解产生活泼自由基影响的ESR研究

Controllable discharging lightning rod; High altitude area; Installation plan; Lightning protection effect.

可控放电避雷针；高海拔地区；安装方案；防雷效果。

Safety ground in oil product discharging quay

装卸油品码头的安全接地

^ Study on Automonitor System and its Operation about Total Polluted Water Discharging Port in Oil Refinary

炼油厂污水总排口水质自动监测系统及运行效果

Ocean Carrier's Lien on Cargo at the Discharging Port

论承运人在目的港对船载货物的留置权

One original and one copy of statement of vessel arrival issued by shipping agent at discharging port.

由船公司在卸货港的代理出具的承载船舶已经到达目的港的声明，正本一份，副本一份。

The elastic deformation and its effect on the wall pressure caused by discharging arch in silo

立筒仓卸料结拱弹性变形及其对仓壁压力的影响

SOC of MH-Ni battery is influenced by many factors such as discharging current 、 voltage, temperature, battery aging and so on.

MH-Ni电池的剩余容量受到放电电流、开路电压、温度、电池老化以及电池之间不均衡性等多种因素的影响，因此对剩余容量的估计和预测具有一定的难度。

Radius is inversely proportional to spark resistance, so smaller spark resistance is propitious to the formation of discharging current.

火花电阻与火花半径成反比，说明较小的火花电阻有利于主放电的进行。

The system is developed into a structure of centralized AC-DC converter and distributed DC-DC converters with constant charging/ discharging current control.

所设计的系统结构为：集中进行整流和逆变，分布式控制蓄电池负载恒流充放电。

This paper designs measurement circuits with isolation amplifier for measurement of gas pressure and discharging current and voltage in ballistic experiment.

本文针对电热发射技术研究中的弹道测试系统，设计、研制了用于进行压力测试、放电电压及电流测试的隔离放大电路。

Determination of the cut-off voltage of VRLA battery at Low discharging current

VRLA电池小电流放电终止电压的确定

During the period of the work, surface roughness will be influenced by discharging current, which includes influencing on discharging current energy, width of current pulse and polarity of current.

在加工过程中，表面粗糙度会受到放电电流的影响，其中包括放电电流能量、电流脉冲宽度以及电流极性的影响。

In this paper, some methods to measure discharging current, the magnetic induction intensity and are presented and discussed, by theoretical analysis and comparison, some conclusions are drawn.

本文简要介绍了电磁成形中放电电流、管坯与线圈间隙中的磁场测量，以及管坯动态变形过程测量的各种方法。

We optimize Then Charging and discharging time of a single user or a group of users with Binary Particle Swarm Optimization Algorithm ( BPSO).

采用离散二进制粒子群优化算法针对单个用户以及用户群一天中充放电时间组合进行最优选择。

Investigates how to control reasonably the slab discharging time for plate rolling line to meet the requirements for scheduling a multi-slab alternate rolling process.

针对中厚板轧线，研究了在实行控制轧制工艺时，如何对坯料的出炉时间进行合理控制，以满足多坯交叉轧制过程轧制节奏控制的需要。

It will stop discharge when voltage, discharging time, and battery capacity reach their limit;

当单体电池电压或组端电压，放电时间、容量到达设定值时，仪器自动停止放电；

Discharging Time of Storage Battery

浅论蓄电池组放电时间

Calculating the discharging time;

放电时间计算；

Discussion of Reflecting Factors on Discharging Time of Hold-over Plate Refrigerated Vehicles

冷板冷藏车放冷时间影响因素探讨