Haitong modified under the single fastest connection from the error-prone sites.

Writing user input validation is pedantic and error-prone but very necessary.

编写用户输入验证是呆板的、易出错的,但是很必要.

The experimental method has a good reliability, and the experimental value has a little error value.

该实验值与理论值误差较小,表明了该方法具有较高的可靠性.

The two optimal rules is minimum sum of error square and minimum sum of error value.

这两种最优准则是误差平方和最小和误差绝对值和最小.

The laboratorial method has a good reliability as the experimental value has a little error value.

该实验值与理论值误差较小,表明了该实验方法具有较好的可靠性.

Erabskate error. Value out of bounds.

软件名?)出错: 数值超出允许范围.

Error Value : Page Template hello . html has errors.

这就告诉你有错误,应该重新载入模板,检查错误消息.

The paper presents an algorithm of automatic SAR image segmentation based on minimum error ratio.

文章提出了一种基于最小错误率的SAR图象自动分割算法.

The forecast accuracy was proved to be satisfactory with an error ratio less than 6 %.

检测了模型的预测精度,结果显示误差小于6%.

In addition, the B 3 G Test Platform supports the Bits Error Ratio ( BER ) test.

B3G测试平台还提供了 误码率 测试的功能.

This paper first explains the three mathematical features of error ratio function.

首先阐明误差比率函数的三大数学特性.

Intelligent temperature controller and PID adjustment make sure the error range of temperature within 1 ℃.

选用智能式温控仪,PID调节,保证将温度的误差范围控制在1℃以内.

After analysing the central errors of GPS, constant speed error model of GPS is established. 3.

并在分析GPS主要误差的基础上, 推导了适用于本文的GPS的定常速度误差模型.

The observation matrix of calibration on relative position measurement is achieved from error model.

从误差建模出发,得到基于相对位置测量的标定参数识别矩阵.

The error model of multi-coordinate NC tool was built on the basis of multi-body system theory.

基于多体系统理论,建立了多坐标数控机床误差模型.

Conclusion Linear Measurement error model is an effective way to cope with measurement error.

结论线性测量误差模型是分析带有测量误差数据的有效方法.

Presents a model of 3 axis CNC, establishment comprehensive error model.

以三轴数控机床为对象, 建立综合误差模型.

It includes error detection, error model and error compensation.

其内容包括误差检测 、 误差建模和误差补偿.

Error: field address ( column 8 ) has changed!

说我那一列的地址改变了,不知是怎么回事?

The CT voltage-current characteristic test method and 10 % error curve effect are analysed in detail.

详细分析研究了电流互感器伏安特性测试方法以及10%误差曲线的作用及求取方法.

The temperature drift error is one of the major errors of the displacement sensor system.

温度漂移误差是位移传感系统的主要误差之一.