The types of land degradation are mainly soil degradation, stone-landification and water erosion.

He's just squirted us with the hosepipe!

他刚刚用管子把我们喷湿了！

The characteristics of carbon fiber, the production methods of dry-jet wet-spinning and radio-frequency processes and the applications such as in civil engineering, aviation/ astrogation, sports, medical treatments and other fields are described.

介绍了碳纤维的性能、干喷湿纺和射频法的生产方法以及碳纤维在土木建筑、航空航天、体育医疗和其他领域上的应用。

In order to obtain PAN ( polyacrylonitrile) spinning solution for dry-jet wet spinning, PAN with higher relative molecular mass was chosen to produce PAN spinning solution, which rheological behavior was investigated in detail with the help of rotating viscosity.

为制备适于干-喷湿纺用PAN（polyacrylonitrile）纺丝溶液，选用了较高粘均相对分子质量的PAN，通过测定纺丝溶液的回转粘度，对其流变性能进行了较为详尽的研究。

Dry-Jet wet spinning is new technique for spinning of fibers, which has strongpoint of both dry spinning and wet spinning.

干喷湿纺兼备干法和湿法的优点，是新一代纺丝方法。

The effects of molecular weight, temperature, shearing rate and solution concentration on viscosity of dry-jet wet-spinning PAN/ DMSO solution were studied by multivariate regression analysis.

应用多元回归分析确定了相对分子质量、温度、剪切速率、浓度4种主要因素对干喷湿纺聚丙烯腈/二甲基亚砜（PAN/DMSO）纺丝原液粘度的影响。

Study on drawing process of dry-jet wet spinning of PAN fiber

干-喷湿纺聚丙烯腈纤维拉伸工艺研究

Nurse the Perineal Operation: Direct sprayed the wound after the operation and cover the wound with wet gauze dy sprayed.

会阴侧切术护理：术后用本品直接喷洒于伤口，并将纱布喷湿后覆盖伤口。

Dry-wet sping technique is used for the preparation of the PES hollow fiber membrane in this experiment.

采用干喷湿纺法纺制成聚醚砜中空纤维膜，研究了凝固浴质量分数与PES中空纤维结构和性能之间的关系。

Spraying the stock solution to moisten the skin for 2 min could reduce the natural bacteria on skin by 98.45% in average.

以其原液对皮肤喷湿作用2min，可使皮肤表面自然菌平均下降98.45%。

Multivariate regression analysis of rheological behavior of dry-jet wet-spinning PAN/ DMSO solution

多元回归法分析干喷湿纺PAN/DMSO原液流变性能

The effects of the jet stretch ratio and draw ratios of three-stage drawing including air drawing, DMF bath drawing, hot water and boiling water drawing and dry-hot drawing on the properties of PAN fiber were studied in dry-jet wet spinning.

研究了干-喷湿纺聚丙烯腈（PAN）初生纤维的喷丝头拉伸比和三级拉伸（空气拉伸、DMF浴拉伸、热水和沸水拉伸、干热拉伸）工艺中各拉伸比对纤维性能的影响。

The PBO polymer solution was synthesized by means of polycondensation of 4,6-diaminoresorcinol ( DAR) and terephthalic acid ( TPA). At 180~ 200 ℃, the polymer starts to form liquid crystal state, and the fiber can be synthesized by using the dry-jet wet-spinning method.

采用4,6-二氨基间苯二酚（DAR）与对苯二甲酸（TPA）缩聚的方法制备PBO聚合物溶液，在180~200℃使聚合物形成液晶态，利用干喷湿纺制法制备纤维。

Spray it a little wet may help ironing out the wrinkles.

熨烫时，可适量喷湿，易于烫平。

Precursors for high performance carbon fibers and Dry-Jet wet spinning

高性能碳纤维原丝与干喷湿纺

Dry-jet wet-spinning process of PAN precursor for carbon fibers

聚丙烯腈原丝及其干喷湿纺

Dry-jet wet-spinning precursor fibers have a smooth surface.

干喷湿纺原丝及碳纤维表面光滑无沟槽。

Compared with wet-spinning, dry-jet wet spinning is a relatively better spinning technology for producing carbon fibers with high performance.

与湿纺的方法相比，干喷湿纺是一种制备高性能碳纤维的优异的纺丝方法。

He boasts that he is one of the best shots in the country.

他自夸是该地最好的射手之一.

We were frightened at the terrible sight.

看到这可怕的景象,我们被吓呆了.

She stood aghast at the snake.

她被蛇吓呆了.