Bush Holds Final Cabinet Meeting.

He gave in his resignation right after the cabinet meeting.

内阁会议开过之后,他立即提出辞呈.

At least 2-years working experiences of technical aspect in switchboard and control cabinet field.

2年以上在开关柜、控制箱行业技术工作经验.

Savings were made on valuable control cabinet space.

充分节约控制柜的占用空间.

Be familiarity with electrical principle diagram for control cabinet.

熟悉控制箱的电气原理图.

The distributed design reduces the required control cabinet volume by 60 %.

由于采用了工业现场级的防护等级,电控柜的成本降低了60%.

The control system consists of two control cabinet and console parts.

该控制系统由控制柜及控制台二部分组成.

Select proper places for electrical control cabinet and finish all the circuit.

选择适当(安全)位置安放电器柜,接通全部线路.

Experienced in control system and automatic equipment design and control cabinet construction.

有控制系统和自动化设备设计和控制操纵台建设的经验.

Dust-proof cushion is mounted in the lid of the control cabinet.

控制箱门板具有安装有 防尘 垫.

Electrical control system : electrical control cabinet, sub control station and pneumatic system.

电控系统: 电气控制柜, 分站及气动系统.

This thesis aimed at the development of the three-phase squirrel-cage induction motor portable diagnosis system.

本文致力于 三相 鼠笼式感应电动机便携式诊断系统的开发.

Series Y 2 three-phase induction motor is defined as totally closed, squirrel cage motors with aluminum frame.

Y2系列电机是广泛应用的全封闭, 鼠笼型 三相 异步电机,为铝质外壳.

A method to detect squirrel cage induction motors with broken rotor bars and eccentricity is presented.

研究鼠笼型异步电动机转子断条故障和偏心故障的在线检测方法.

Three-phase list asynchronous motor of squirrel cage starting characteristic the parameter resolution through the electrical machinery.

三相单鼠笼异步电动机的起动特性则由电机的参数决定.

The easy-solved mathematical model of the broken-rotor-bars squirrel-cage induction motor is established with synthetic vector question.

针对断条破坏了电机原有对称关系而使建模仿真变得困难,采用综合矢量法,建立了转子断条感应电动机易于求解的数学模型.

Pump, air pump and so on generally is pulling by squirrel-cage motor, moving in constant velocity.

泵 、 风机类负载通常采用鼠笼式异步电动机拖动, 恒速运行.

A practical die structure and the process for die casting squirrel cage rotor are presented.

给出了压铸鼠笼转子的实用模具结构和压铸工艺,论述了模具的设计要点.

A squirrel-cage tail wheel is welded and provided with an inclined discharging wide plate.

鼠笼式尾轮上焊有倾斜排料幅板.

This paper develops a set of real time motor control prototype based on a squirrel-cage motor.

本文以一台鼠笼式异步电动机为实验对象,研制了一套实时的电机控制系统作为混合控制系统的实验平台.

Motor control standard Squirrel Cage 4-pole motor.

电机采用标准鼠茏(笼)型4极电动机.