Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

It is an exercise for the enhancement psychology bearing capacity and psychological adjustment ability.

也就是锻炼增强心理承受能力和心理调节能力.

Will the joint area with dense hooped reinforcement enhance the bearing capacity of the frame column?

节点区箍筋加密是否有利于框架柱承载能力的提高?

The conception of effective width is proposed to be used in load-bearing capacity of wall element.

焊接薄壁箱形构件板件的宽厚比较大,受压板件出现局部屈曲,可以采用有效宽度的概念确定构件的正截面承载力.

Study the performance of subgrade infiltration, bearing capacity and resisting frost of base.

目的研究透水路面土基的渗透 、 承载力性能及饱水状态下基层的抗冻性能.

It is of important significance to study the ultimate bearing capacity of foundation in three-dimensional stress.

研究三向应力状态下条形地基极限承载力问题具有重要的理论和实际意义.

High quality metal steel frame, stronger bearing capacity.

优质金属钢架, 承重更强.

Thickened steel body for good of bearing capacity.

超厚钢结构机体,承受刀座力量方式固定动刀.

Conic roller bearing is used for desirable bearing capacity.

园锥滚柱轴承,承载力大.

Compared with the angular contact ball bearings, bearing capacity, low speed limit.

与角接触球轴承相比 、 承载能力大, 极限转速低.

Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

渐开线花键芯轴: 理想承载、装拆易行.

Lining cracks will affect the bearing capacity and the safety of tunnels.

隧道衬砌开裂将影响隧道的承载能力和使用安全.

Ultimate limIt'state, which corresponds to the highest value of the load-bearing capacity.

承载力极限状态, 它相当于结构能够达到的最大承载能力.

Involute spline spindle: ideal bearing capacity and easy assembling and dismantling.

渐开线花键芯轴: 理想承载.装拆易行.

Problems are analyzed such as the subgrade bearing capacity, sedimentations and anti-float.

针对相关地基承载力及沉降、 抗 浮等问题作了分析与探讨.

Bearing capacity research of ACSR with unequal altitude support.

支座不等高拱形波纹钢屋盖承载力的研究.

Remove thrust bearings from rear main bearing carrier.

从后主轴承托架上拆下止推轴承.

Bearings: Low friction, superior rod diameter to bearing length ratio.

轴承: 低摩擦, 优于棒直径长度比关系.

Machinery self-lock and heavy load bearing plate type of chain lifting system. High safety performance guaranteed.

机械式自锁,重负荷承载板式链条举升系统,安全性能高.

And the hook bearing plate and tank plate located between the ordinary.

支座和吊钩与罐体钢板间一般设垫板.

The dead center , being a stationary bearing point, must be lubricated.

由于是固定的支承点, 死顶尖必须润滑.