The piston froze in the cylinder.

This large gear turns the small one to rotate the cylinder.

这个大齿轮带动小齿轮使滚筒旋转.

Do not overheat cylinder to increase pressure or discharge rate.

禁止使钢瓶过热来增加压力或流速.

Restrict access to cylinder storage areas.

对进入钢瓶储存区域加以限制.

The stator is an elastic cylinder on which the rectangle piezoelectric ceramics are bonded.

定子采用在圆筒弹性体外表面粘贴矩形板压电陶瓷构成.

A printing plate and diameter varies by Rotary cylinder is connected to a variety of sizes.

印版与直径各不不异反转展转圆筒拆开以获百般尺寸图案.

Compressing the rings gives them an initial tension; they press tightly against the cylinder wall.

受压使之具有预张力, 活塞环就紧紧地压在气缸壁上.

This paper expounds the definition, types, features, production, inspection and advantages of PCCP concrete cylinder pipe.

阐述了PCCP管道的定义 、 类型 、 特点 、 制造 、 检验以及优点.

A plate guide device includes a magnet cylinder and guide plate.

一种印版引导装置,包括磁性滚筒和引导板.

The vacuum on the cylinder holds the substrate and rotates in a clockwise direction.

印机圆柱内的真空部份承托著基底,以顺时针方向转动.

Transient temperature measurements of cylinder caps by the aid of microcomputers are introduced.

介绍了利用微机进行发动机汽缸盖动态温度的测量.

Dispersed shrinkage is the main reason causing leakage of multi-cylinder heads of diesel engines.

摘要缩松缺陷是导致多缸柴油机缸盖铸件渗漏的主要原因.

Hydrogen chloride is a liquefied compressed gas. The cylinder contains both liquid and gas.

氯化氢是一种液化压缩气体. 钢瓶同时装有液体和气体.

Compared with horizontal cylinder granulating method, its mixing effect is more reasonable.

较卧式湿法具有更为合理的混合效果.

A typewriter in which the characters are situated on a type cylinder.

字符位于打印筒上的一种打字机.

HINT: Keep the upper bearing and upper thrust washers together with the cylinder block.

提示: 请上轴承和止推垫圈上与缸体.

The casting reject ratio of cylinder block caused by crankcase core is controlled below 0.25 % at present.

目前,我厂在气缸体的生产中,由于曲轴箱壳芯原因造成的缸体铸件废品可控制在0.25%以内.

Tighten the radiator drain cock and ( if removed ), the cylinder block drain-plug.

旋紧散热器排放口和汽缸体排放塞 ( 如果它被卸去了 ).

Like the cylinder block, the head is made from either cast iron or aluminum alloy.

像气缸体一样, 气缸盖是由铸铁或者铝合金制成.

The principles to construct finite element model modal analysis of the cylinder block have been obtained.

通过研究,得出了建立内燃机机体的有限元模型的一些原则.

Relative to the metal roller and plate cylinder, block drum and nano-imprint lithography drum case might.

不绝对于金属网纹辊与印版滚筒 、 印版滚筒与压印滚筒的不张辛而言可以不详不小些.