Simply because the testing mechanism was calibrated to fix the result.

The storage temperature:-10 ~170, and It'should be calibrated once a year.

仪表贮藏环境: -10 度~+170度,仪表每距离一年校准一下.

Suitable calibrated dynamometers were used to control the pull in the prestressing cables.

用合适的率定过的量测计控制预应力钢索的拉力.

A set of calibrated weights will be needed.

需要一套经过校准的砝码.

Usefulness includes the fact the negatives have been calibrated.

所谓有用,是指在底片上要有标度.

If he stands on a balance scale calibrated in newtons , what will the scale read?

假如他站在用牛顿刻度的秤上, 试问秤的读数是多少?

The discharge coefficient for each elbow flowmeter should be calibrated in practice.

每个弯管流量计的流量系数须经过实际标定.

Make sure all measure instruments and equipments are properly calibrated.

机床定期校验,测量工具校验.

Duplicate 12-in . long specimens were calibrated with an 8-in . gage length.

两个完全相同的12英寸试样用8英寸标距来标定.

The flexible diaphragm is connected to a plat cantilever-calibrated spring.

柔韧的膜片一扁平的悬臂校正弹簧相连.

After the top is braced, he re-calibrates it if he decides it is necessary.

在面板黏好力木之后,如果需要的话, 他会再做一些厚度校正.

Locates the set in advance, calibrates the world, the drift angle.

预先定位套准,校准天地,斜我的偏差使整套图案位置准备, 一线不差.

It also provides a correct installing position and calibrating method and adjustment method.

还给出了正确的安装位置、检定方法和调整方法.

This thesis mainly discussed the design, manufacturing and calibrating procedure of the micro temperature sensor.

本文论述的主要内容是铝制热敏电阻式微温度传感器的设计 、 加工和实验测试过程.

Meanwhile, two examples about calibrating transducer's dynamic response characteristic are given.

同时, 给出了采用正弦压力发生器校准传感器动态特性的两个实例.

Dealt with the weigher calibrating, the hanging counterweigher method was successfully tryed.

在配料秤的校核上, 尝试了挂码校秤,并获得了成功.

Self calibrating and self diagnosis programs. static and standard dynamic balancing and special rebalancing.

静平衡,标准动平衡及特殊形状轮辋平衡. 带有车轮旋转防护罩安全可靠.

China for calibrating forging equipment rarely performs energy calibration energy calibrationcalibration.

锻压设备力能特性的标定对于检验设备的性能有着重要的意义.

A method for calibrating mapping camera and cubic prism coordinate system was introduced.

介绍了一种测绘相机坐标系与立方镜之间关系的标定方法.

The calibration instrumentation can provide great benefit for calibrating CT on site.

该仪器的出现可以为电流互感器的现场校验提供极大的便利.

The effects of deflections are evaluated during the process of calibrating the balance.

变形影响是在天平校准的过程中测量的.