A method of preparing deformable polydimethylsiloxane sheet culture substrates by oxygen plasma vulcanization was developed.

A method to predict residual deformation based on inherent strain was introduced.

阐述了以固有应变为基础的弹性板单元有限元残余变形预测法.

The dynamic deformation process of sheet metal on the EMF was investigated.

分析了平板电磁成形的动态过程.

A polarized scanning camera used for dynamic measurement of thermal deformation fields is proposed.

提出了利用偏振扫描相机进行激光散斑照相,研测了物体的二维热形变场.

In order to research the deformation and failure adoptingmodel experiment , the numerical simulation method to analyzes.

总结高陡路堑边坡变形与破坏的类型, 分析其影响因素.

Note ensure that the printer does not make the pressure relief image flattening or deformation.

夺目包管打印机不张力不会使浮雕影像变平或变形.

This paper studies its mechanism from stabilization, deformation and combined action.

本文从变形、受力和共同作用等方面研究其工作机理.

The calculated deformation is almost equal to the real situation by measurement.

经检测,计算变形量与实际情况基本一致.

Torsion deformation is the biggest effect factor on elastic limit equivalent stress.

扭转变形是对钢丝的弹性极限等效应力情况影响最大的因素.

The reason of deduces deformation martensite in the drawing process is analysed also.

并分析了拉拔时产生形变马氏体的原因.

a deformation of the spine

脊柱的畸变

Its characteristics include fast cutting , narrow and small deformation etc.

具有切割速度快, 割缝小等特点.

Works of art and design shape and deformation in the main realistic.

艺术设计作品的造型以写实和变形为主.

The most wear form is adhesive wear, arc erosion and plastic deformation.

粘着磨损 、 电弧侵蚀、塑性变形是其主要的磨损形式.

In this paper, the effect of room temperature deformation on boronization is investigated.

本文研究了室温形变对渗硼过程的影响.

After scientific bamboo mosaic from the high temperature and high pressure, high deformation difficult.

竹材经过科学的高温高压拼接而成, 超高不易变形.

Without loss of generality, shear deformations will be neglected.

不失一般性, 忽略不计剪切变形.

Wave propagation in piezoelectric cylindrical laminated shells under large deformations was studied.

研究了考虑转动惯量和大变形效应的复合材料压电层合壳内的波传播规律.

There are widespread and rather strong intraplate deformations in Chinese continent.

中国大陆板内变形普遍比较强烈.

Initially, large deformations take place as a result of grain movements and readjustments.

最初, 由于颗粒的移动和调整而使多孔介质发生较大变形.

Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

当微量变形能使加载条件发生颇大改变时,就会产生颇大的差异.