Ano , yes. Now are you going to take me?

The kinetics and mechanism of exciplex formation of 9,10-dicyanoanthracene ( DCA ) by acenaphthenone ( ANO ) have been studied.

研究了苊酮 ( ANO ) 对9,10-二氰蒽 ( DCA ) 的荧光猝灭与激基络合物形成的动力学与机理.

Is their an estblished schedule for the anode, buss bars and cables maintenance? Is it current?

是否建立阳极, 电镀条鱼电缆的维护计划? 是否已经运行?

Anode materials are the key factor of electrochemical oxidation for treating organic wastewater.

阳极材料是电化学氧化法处理有机废水的关键.

Titanium anode coated with metal oxide is a new insoluble anode, which is also named DSA.

钛基金属氧化物涂层电极又称DSA,是一种新型不溶性阳极电极.

The objective of pyrometallurgical process is to produce anode plates suitable for electrolysis.

火法精炼的目的是生产出符合电解工序要求的阳极板.

The technology of treating anode mud is introduced in this paper.

本文介绍了处理铅阳极泥工艺──盐酸浸铜、锑-浸渣氯化浸金.

Then bismuth in lead anode mud was determined by EDTA complexometric titration.

王水溶样,氢溴酸除锡,直接用EDTA容量法测定铅阳极泥中高含量的铋.

If rod is more than 50 % depleted, the anode rod should be replaced.

如果阳极棒消耗超过50%, 就应该更换阳极棒.

There is a long history of using concine petcoke an anode block in the Aluminium industry.

铝行业中使用粉磨的碳素石油焦作阳极中使用粉磨的石油焦作燃料的历史已经很长了.

We also provide electroplating and oxidation anode treatment all kinds of metal or nonmetal parts.

此外,我们还提供电镀和阳极氧化处理各种金属或非金属零件.

The active dissolution in occluded anode is controlled by an irreversible charge transfer process film interface.

闭塞微区内阳极溶解受界面电荷传递的电化学过程控制.

The formation of virtual anode effected by hollow cathode is investigated at different pressures.

研究了较高气压和低气压下空心阴极效应在形成虚阳极过程中的作用.

Also, the rapidly solidified layer unalloyed when the electrode ( Cu ) was set to be the anode.

此外, 以纯铜为电极 ( 正极 ) 时,则发现急速凝固层未发生合金化.

Studies of tin based anode materials for lithium ion secondary battery have been reviewed.

综述了锂离子蓄电池锡基负极材料的研究.

So A new method for modification graphite anode is offered.

这为石墨负极材料的改性提供了一条新途径.

Fig. 4 Pt distribution in copper anode slime treatment process.

图4铜阳极泥处理过程中铂的走向与分布.

Main body is made by SS 304 stainless steel & processing by anode of aluminum metal.

全机为S304不锈钢 与 经阳极处理之高级铝合金制成.

All renascent oxygen is consumed for oxidizing metal anode to form metal oxide film.

当形成足够厚的氧化膜后,阳极的氧化速度减慢,阳极表面才析出氧气.

The adsorption phenol saturated carbon was regenerated by electrochemical technology with anode extension.

采用阳极扩展电化学氧化技术对吸附饱和苯酚的活性炭进行了电化学再生.

In addition, a few representative technologies to treat copper anode mud are introduced.

选冶联合处理.并介绍几种有代表性的工艺过程.