Heat curing furnace is an important equipment for forming of glass fiber reinforced plastic products.

A room temperature rapid curing acrylic adhesive-aerobic adhesive is introduced.

简单介绍了一种室温快固丙烯酸酯胶粘剂 ─ ─需氧胶的研究概况.

The curing agent has been prepared by one-step catalytic polymerization process with a specific chemical additive.

采用特定的化学助剂,通过催化聚合法一步合成快干型低游离TDI聚氨酯固化剂.

A latent curing agent of epoxy resin was synthesized and characterized by elementary analysis and TG.

采用乙二胺与丙烯酸甲酯在乙醇中反应合成了一种具有潜伏性的环氧树脂固化剂.

Finally the curing agent MPDA is chosen for the high strength glass fiber composite bulletproof material.

综合考虑选用间苯二胺作为高强玻璃纤维复合防弹板的固化剂.

The effects of agent such as single acid agent and complex acid curing agent were studied.

探讨了单一酸和复合酸固化剂对发泡过程的影响.

This paper summarized the current research development of nitrite-free curing agent for meat and its products.

本文综述了肉类及肉制品中无硝腌制剂的研究进展.

The develop process of the curing agent was described in paper.

论述了以石蜡、亚麻籽油为主要原料的混凝土养护剂的研制方法.

Curing agent are two types of TGIC and 105.

固化剂有含TGIC和105两种产品.

A quick curing liquid adhesive was prepared from rubber and phenolic resin as the main component.

本文介绍了以丁腈—酚醛为主要成份所研制的单组分快干液体胶粘剂.

Quality of cold , curing Yishen , Consumer Yang Xue, black hair improves eyesight.

味甘性寒、补肝益肾 、 滋阴养血 、 黑发明目.

When curing temperature was preferred to be 260 and the percentage of solidification agent was 3 %.

固化剂质量分数为3%,固化温度为260℃时得到的膜的性能最佳.

For traditional thermal curing powder coatings, there has a big limit of high curing temperature.

但普通的粉末涂料存在固化温度偏高,不能用于热敏性底材,限制了其应用范围.

It's curing temperature high and difficult to molding.

聚酰亚胺固化温度太高,并且难于成型加工.

Of course, curing temperature is not possible.

当然固化温度并不是越高越好.

Dan Zufen moisture curing, the curing time is not reduced, good flexibility, and strong anti-deformation.

单组份有机硅湿气固化, 固化时不收缩, 弹性佳, 抗 形变能力强.

Also introduced in ink, phototoxity can also be accelerated curing varnish on the surface.

还有就是在油墨中加入适量光敏剂, 也可加速光油表面的固化.

The heat-insulating modes, mechanism and application of air-curing high-temperature heat-insulating coatings are introduced.

介绍了常温固化耐高温隔热涂料的隔热方式 、 机理和应用.

The paper introduced the technical progress in air curing fluorinated polyurethane coatings.

介绍了常温固化含氟聚氨酯涂料的研究进展.

Concrete curing should immediately start after frame removed.

6砼拆模后立即均匀涂刷砼养护液.

Half of Gilead, and Ashtaroth and Edrei ( the royal cities of Og in Bashan). This was for the descendants of Makir son of Manasseh& for half of the sons of Makir, clan by clan.

还有基列的一半和亚斯他录、以得来，就是在巴珊，噩的王国的两座城，都是按着家族分给玛拿西的儿子玛吉的孙子，就是分给玛吉的一半孙子。