Training of the Innovation Ability in the Applied Chemistry Specialized Experiment Class

Construction of Curriculum System for Applied Chemistry Technology Specialty Based on Typical Chemistry Process

基于典型化工过程构建高职应用化工技术专业课程体系

Department of Applied Chemistry, Qingdao Science and Technology University;

青岛科技大学应用化学系；

On Chemistry Analysis Experiment Content and Teaching Mode for The Applied Chemistry Major

应用化学专业化学分析实验内容及教学模式改革初探

Teaching and Practice of Physical Chemistry Teaching in Applied Chemistry Discipline

应用化学专业物理化学教学改革与实践

Model Curriculum Construction and Teaching Practice of Applied Chemistry in Oil and Gas Field

油气田应用化学精品课程的建设与实践

Exploration of Establishing Experimental Teaching New System in Applied Chemistry

构建应用化学专业实验教学新体系的探索

The friction and wear behaviors of the PFW/ PU coatings filled MoS_2 and graphite are dependent on the applied load.

同时，负荷和速度对添加MoS2与石墨的聚四氟蜡/聚氨酯复合涂层的摩擦磨损性能有很大影响。

Elastic recovery means that when the applied load is released, the piece returns to its original shape. test method to prove the resistance to initial ring deflection

弹性回复是指当样品所受应力撤销后，其完全回复到初始形状的现象。检验初始环状变形可能性的方法

When the applied load increased, because larger size SiC particles mashed, the load carrying capacity decreased, which lead to delamination wear occurring.

随着载荷的增加，由于大粒度SiC颗粒易于破碎，承载作用下降，导致剥层磨损的发生。

The applied load and deformation displacement are quite small due to the decrease in the material dimension. That gives rise to big difficulties in the experimental measurement.

由于材料尺度的减小，材料所受的外加载荷与变形位移非常小，从而给实验测量带来了很大的困难。

Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.

弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。

The simulation results show multicast routing algorithms have shorter average latency and higher throughput and balanced applied load compared with unicast routing algorithms.

通过模拟实验表明，多播较单播通信具有更小的平均传输延时和更高的网络吞吐量，且负载分配均匀；

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

Because the hardness number obtained depends on the applied load, Knoop test restless should always cite the load used.

因为硬度值的获得和载荷十分密切，所以不太精确的努氏试验总是采用用过的载荷值。

In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.

在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。

Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.

弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。

At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.

在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。

The result shows that the optimal value of filler metal thickness exists and the residual stress decreases with the applied load increasing.

结果表明，钎缝厚度存在最佳值，在一定范围内钎焊压力增大，残余应力减小。

The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.

涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。

The fracture mechanism of PVC under applied load and the cause of' stress relaxation under high speed tension load are discussed.

探讨了PVC在外加载荷作用下的断裂过程和高速拉伸的应力松驰现象的产生机制。