Test method for abrasion resistance of concrete and its products ( Ball bearing method)

The Research of Testing Abrasion Resistance for Concrete of Cast Stone

铸石混凝土耐冲磨性能的试验研究

As the important part of the Three Gorges project, the lower-level outlets have a complicate geometry attended by strict construction requirements, specially, in the temperature control in summer to prevent the cracks in abrasion resistance concrete.

泄洪深孔是三峡工程最重要的部位之一，结构体形复杂、施工要求严格，温控防裂是该部位抗冲磨混凝土最突出的矛盾。

Construction of Abrasion resisting Concrete of Bottom Sluice in Fenhe Reservoir ⅱ

汾河二库工程大坝底孔抗冲磨混凝土的施工

High strength, Scour and Abrasion Resisting Concrete In the Fenhe Reservoir ⅱ Construction

汾河二库工程500~高强抗冲磨混凝土施工

Study on the hign properties and abrasion resistance concrete using in road and bridge interlocking area

路桥衔接板块高性能耐冲磨混凝土的研究

Preparation of Abrasion Resistance Concrete with Silica Fume Slag Powder

复掺硅灰、矿渣微粉配制抗冲磨高性能混凝土

Effects of fly ash on resistance to abrasion of concrete pavement

粉煤灰对混凝土路面耐磨性的影响

Ceramics tile are widely used because they have many good characteristics sue has heat-resistance, abrasion hardness, wear-resistance, acid-proof, low-expansion and low-price.

陶瓷玻化砖具有耐高温、高硬度、耐磨损、耐腐蚀、低膨胀系数、价格便宜等特点，因而其用途非常广泛。

By Make experiment of plunger case surface abrasion hardness, in the last, adopt high strength engineering plastic to act as anti-abrasive material, make the success, get great result.

通过对柱塞的表面耐磨层进行各种试验，最后采用了高强度工程塑料进行压注试验，取得了成功，效果显著。

Gray spot; the toughness matching between base metal and weld; lamination and seperation of steel and abrasion hardness, etc.

内容包括焊缝沟腐蚀问题、灰斑问题、母材与焊缝的韧性匹配问题，钢材分层及断口分离问题以及硬度偏低引起的耐磨性问题等。

An method for impact abrasion test, single pendulum scratch method, is introduced and discussed.

本文介绍了用单摆划痕法研究材料冲击磨损性能的实验原理、装置和冲击磨损性能参量。

The Abrasion Test of Cast Wear Resistant Materials in Nitric Acid

铸造耐磨材料在硝酸中的磨粒磨损试验研究

Study on the Design and Application of the Abrasion Test Instrument of Endovascular

腔内隔绝用人造血管耐磨损性测试仪的设计及其应用的实验研究

Wet abrasion test under the conditon of freezing and thawing cycle shows that slurry seal can keep good durability in drastic temperature change.

冻融循环的湿轮磨耗试验表明了稀浆封层能在剧烈的温度条件的变化中保持良好的耐久性。

For material plastic, rubber, plywood, glass, painting, textile* etc, this abrasion tester provides a wide range test through different grinding wheel.

简介举凡塑胶、橡胶、合板、玻璃、涂料、纺织等原物料都可使用之泛用性磨耗试验机。

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。

Amsler type abrasion tester

阿姆斯拉型耐磨试验仪

The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.

讨论了在动载三体磨粒磨损条件下，马氏体钢配副变化对磨粒磨损系统耐磨性的影响。

Smith's cloth abrasion tester

史密斯织物耐磨试验仪

Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.

在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。