In 2010 it ran out of the cryogenic coolant that enabled its primary mission of mapping the skies.

Importance of individual nuclides were compared during normal coolant release, gap release and core melt.

文章比较了正常冷却剂释放、间隙释放和堆芯熔化状况下不同核素对安全壳内辐射监测仪表示值的相对贡献。

Flow analysis and computation of coolant in the open channel is involved with evaporation of heated coolant in the rotor. First, the paper presents analysis of evaporation of heated coolant in the open channel rotating around horizontal axis.

转子开放管道式蒸发冷却流动分析和计算，涉及到了旋转体内受热流体的沸腾状态。

Based on the damage mitigating control ( DMC), this thesis focuses on the damage analysis and control of the coolant channel ligament which is treated as one of critical components for the liquid-propellant rocket engines ( LRE) during a transiting operating condition.

针对减损控制技术，本文以液体火箭发动机为研究对象，视推力室冷却夹套隔片为易损部件，在发动机的转工况过程中，对其损伤进行分析与控制研究。

Disigning coolant channel on the firebox of liquid rocket engine to loxodrome ( equal-angle helix) groove can improve firebox coolant capability greatly.

将液体火箭发动机燃烧室的冷却通道设计为斜航线（等倾角螺旋线）槽形，可以大幅度改善燃烧室的冷却性能。

The internal coolant channel in an actual turbine blade was simplified into a variable cross-section channel with ribs and bleeding holes.

以航空发动机涡轮叶片中段内部冷却通道为研究对象，将其简化为带肋变截面U型通道。

The two-year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method.

经过两年多的实际生产过程应用，验证了所开发的斜航线冷却通道加工方法的正确性和可行性。

An air flow simulating test in the coolant channel of the core bottom of the 10 MW HTR module

10MW高温气冷反应堆堆底结构中的气体流动模拟试验

An Experimental Investigation of Heat Transfer in Rotating Coolant Channel

模拟涡轮旋转叶片冷却通道换热的初步实验研究

Chemical Function of Water-based Coolant for Optical High-speed Fine Grinding

水基型光学高速精磨冷却液的化学作用

In this paper, the choice of physical coolant and chemical coolant for pyrotechnic gas generator, cooling methods, the configuration design of cooling cell and numerical simulation of cooling course are reviewed.

本文就冷却剂的选择、使用方式、冷却单元结构设计及冷却过程数值模拟进行了综述。

In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.

在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。

Check air filter and coolant level;

检查空滤芯和冷却剂液位；

The method to machine the parts made of stainless steel which adopts cooled air as coolant and a little plant oil as lubricant, is studied.

对采用冷风冷却微量植物油润滑切削加工不锈钢零件的方法进行了研究。

Determination of Electron Density in Ar air Mixed Coolant Gas ICP

小功率空气-氩气混合气冷却ICP中电子密度的测定

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁（δ＝0.2mm）零件，材质为Inconel625高温合金。

Effects of air coolant injection on cascade surface pressure distribution

冷气喷射对直叶栅型面压力分布影响的实验研究

Check coolant quantity, engine oil quantity in oil pan and fuel injection pump, check "three leakages" situations.

每天进行日常维护，检查冷却水量、油底壳及喷油泵内的机油量、检查“三漏”情况。

Investigations on the effects of various experimental parameters indicate that fuel composition, engine load, air/ fuel ratio, temperatures of coolant and oil, and testing time significantly affect the sludge formation.

指出燃料组成、发动机负荷、空燃比、冷却液和机油温度以及试验时间是影响油泥生成的重要因素。

Brief introduction on recovery treatment of deteriorated lubricant and coolant oil

陕北石油秩序简述润滑、冷却用油劣化后的再生处理

Mineral oil is an excellent type of dielectric liquid with high coolant capability and low cost, it has played important roles as both insulators and coolant liquid in oil-immersed high voltage equipment more than a century.

矿物油兼具良好的电气绝缘、冷却性能以及低廉的成本，在油浸绝缘高电压设备中已有一个多世纪的应用历史。