Contact corrosion of carbon-copper couple in 3% NaCl aqueous solution had been studied.

The contact corrosion characteristics of hydraulic concrete have been studied in this paper.

本文通过试验研究了水工混凝土的接触溶蚀性能。

Exploration for Contact corrosion of Ti and Ti-Alloy and Protective Test

钛及钛合金接触腐蚀与防护试验探讨

The results of salt spray test and contact corrosion test further approved the same conclusion.

从盐雾试验和接触腐蚀试验结果进一步证实这一结论：注入试样比非注入试样在抗蚀性方面提高很大。

Design and execution of a multi-tiered distributed database for marine corrosion and protection

多层分布式海洋腐蚀与防护数据库的设计与实现

Progress and Trend of Marine Corrosion Monitoring

海洋腐蚀监测的发展现状及趋势

Study of marine corrosion and antifouling behavior of copper alloys

铜合金实海暴露腐蚀与抗污行为的研究

The structure of the rust layer formed in marine corrosion of low alloy steel

低合金钢在海水中局部腐蚀锈层结构的研究

Several familiar forms of marine corrosion were generally introduced with its evaluation techniques.

概述金属材料常见的几种海洋腐蚀形态，并从技术层面介绍不同腐蚀形态的评价方法。

Study of Marine Corrosion of Low Alloy Steel with Electrochemical Impedance Spectroscopy

低合金钢实海腐蚀电化学阻抗谱研究阻抗传感器，阻抗换能器

Analysis of Marine Corrosion Resistance of the Metallic and Organic Coatings

金属和有机涂层的耐海水腐蚀性分析

Determination of corrosion preventive additive in engine oil by pyrolysis gas chromatography

透平油中防锈添加剂的裂解气相色谱测定

A Technique of Corrosion Preventive of Buried Pressure Steel Pipe for Sewage

浅谈埋地污水压力钢管防腐技术

Whole material of this practical new type uses corrosion preventive stainless steel.

本实用新型全部材料采用耐腐蚀不锈钢。

Finally, the construction process of the corrosion preventive project is presented.

最后介绍了该措施的施工过程。

And then the corrosion control and prevention were proposed.

进而提出了腐蚀控制与防范的措施。

A probe into structure corrosion control strategy in chemical environment

化工环境下的结构腐蚀控制策略初探

Study on the database of corrosion control design for aircraft structures

飞机结构腐蚀控制设计数据库研究

An Integrated System on Design and Evaluation of Maritime Corrosion Control

海洋腐蚀控制设计及评估综合系统

No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.

对于不同内部介质接触的部件，如外表面、防护罩及支承凸缘等不需腐蚀余度，地脚螺栓除外。

Other parts add1/ 2 of the specified corrosion allowance on each side.

两个压力室的分隔部件，应对部件的的每侧提供一个腐蚀余度。