WC的例句大全

Study on the Tribological Properties of WC-Ni-Co-Mo-PbO High-Temperature Self-Lubricating Cermet Material

碳化钨－镍－钴－钼－氧化铅系高温自润滑金属陶瓷材料的综合性能研究

Laser alloying of C Si B RE+ WC on nodular cast iron using CO 2 laser has been made.

采用CO2激光器对球墨铸铁表面的C Si B RE+WC涂层进行了激光合金化处理。

P& WC hid from Hamilton Sundstrand why it needed software modifications.

普惠加拿大没有告诉汉胜为何需要改动软件。

The regions of original WC particles are characterized by a great deal of larger original WC particles with angularities which are slightly changed and long oval carbides with Fe_3W_3 C layer.

原始颗粒区组织中碳化物的特征是存在大量变化甚微的角状大尺寸原始WCp及具有明显反应层的长椭圆状WC颗粒，界面反应产物为Fe3W3C。

The effects of different granularity proportion and volume fraction of WC grains as wear resistant phase on microstructure and abrasiveness of composite alloy were studied by experiment. The research results were then applied to wear resisting supporting roller and disc pad used in middle speed coal crusher.

试验研究了耐磨相WC颗粒的不同粒度配比和体积分数对复合合金组织及耐磨性的影响，并将研究结果应用于中速磨煤机耐磨辊胎和盘瓦。

The γ phase composition limit and the carbon content width in two phase WC-Co cemented carbides were derived according to the relations among all phases in aloys.

依据WC－Co硬质合金各相含量间的关系，推求出两相（WC＋γ）合金中γ相成分极限和碳含量宽度。

Microstructure and Properties of WC-steel Composite Coating Produced by Argon-arc Welding

氩弧熔覆WC-钢结硬质合金涂层组织性能研究

After 1963, tungstic acid, APT, W powder, WC powder and cemented carbide could be produced too.

1963年以后,进一步发展到生产钨酸 、 钨酸钠 、 仲钨酸铵 、 钨粉 、 碳化钨粉、硬质合金等.

A stepwise multiple linear regression analysis showed that HDL-C, FPG, WC , BF % enter the regression equation.

多元逐步回归分析发现血清 高密度 脂蛋白胆固醇 、 空腹血浆葡萄糖 、 腰围 、 体脂含量进入回归方程.

Objective : To identify gene mutation in a family with Weber-Cockayne type epidermolysis bullosa simplex ( WC-EBS ).

鉴定单纯型大疱性表皮松解症Weber -Cockayne 亚型 一家系中的基因突变位点.

Broken raw WC particle still keeps raw shape eutectic carbide is severely smashed during thermal cycling.

原始碳化物开裂后仍保有原始形貌,复式碳化物开裂后易“碎化”.

Bulk binderless ultrafine pure WC with nearly full densification was obtained by spark plasma sintering.

利用放电等离子烧结技术得到了近全致密的无粘结相超细纯碳化钨材料.

Bringing us WC DH and 4 X race action combined with dirt jumping, trails and street.

同时给我们带来了混合有泥地跳跃 、 赛道、街道等等比赛动作场面.

Study is made of the genesis of the aggregate in WC powder.

对WC粉中聚集体的成因进行了试验研究.

The wear mechanism of original WC-Ni cemented carbide during the wear process is abrasive wear with the main characteristics of plastic deformation of Ni binder phase and fall-out of WC grains, and wear resistance depends on the hardness of cemented carbide.

原始WC-Ni硬质合金的磨损以Ni粘结相的塑性变形和WC晶粒脱落为主要特征的磨粒磨损，耐磨性依赖于硬质合金的硬度。