binder的例句大全

The erosion mechanism at 90 degrees includes block exfoliation, the plastic deformation of binder phase and the extrusion of the carbides, meanwhile, the brittle fracture character has also been observed with a speed of 420 meters per second.

90°冲蚀机制包括块状剥落，粘结相的塑性变形和碳化物的挤出，420m/s冲蚀的粘结相还表现出了脆性断裂的特点，块状剥落是质量磨损率升高的主因。

The wear mechanism of original WC-Ni cemented carbide during the wear process is abrasive wear with the main characteristics of plastic deformation of Ni binder phase and fall-out of WC grains, and wear resistance depends on the hardness of cemented carbide.

原始WC-Ni硬质合金的磨损以Ni粘结相的塑性变形和WC晶粒脱落为主要特征的磨粒磨损，耐磨性依赖于硬质合金的硬度。

Study on components of binder affected to the thermal stability of coal briquette

黏结剂组分对型煤热稳定性影响的研究

The acrylic emulsion binder had good film forming, better adhesion and chemical stability, its threadlike structures would bring weakness of heat-adhesive and cold brittleness and clogging screen.

丙烯酸酯类粘合剂具有较好的成膜性，良好的粘着力及化学稳定性，但其线型结构特点，易造成聚合物薄膜出现热粘冷脆及印花堵网等问题。

A binder is necessary for strand integrity.

粘结剂对纤维的集束性能是必需的.

An ultra fine cemented carbide with tungsten powder and binder cobalt.

一种由碳化钨和粘结金属钴组成的超细颗粒硬质合金.

The influence of carbon content. nickel content in binder and temperature on the thermal diffusivity of WC-Co-Ni hard metals were studied.

本文研究了配碳量、粘结相中镍含量和温度对WC－Co－Ni硬质合会热扩散事的影响。

On the other hand, Co binder gradient formed by liquid state carburizing is due to migration of W atoms driven by diffusion of carbon atoms, leading to coarser and closer WC grains in the surface and inward diffusion of Co atoms.

液相渗碳处理时钴相梯度结构形成主要是碳原子扩散驱动下的W原子迁移，导致表层碳化钨晶粒长大并相互靠近，从而使液态钴向合金内部迁移。

Application of butadine binder to pigment printing

丁二烯粘合剂在涂料印花中的应用

a loose-leaf binder

活页夹

The extent to the effect of types and content of mineral admixtures on ARH reduction of concrete resulting from self-desiccation can be reflected by the parameter of the effective water to binder ratio r_e effectively.

有效水胶比re可有效地反映不同龄期下矿物掺和料种类和掺量等变量对混凝土自干燥效应的影响程度。

The ARH change laws of concrete with water to binder ratio lower than 0.4 can be expressed with a non-linear equation.

水胶比小于0.4的混凝土其自身相对湿度变化规律可用非线性方程表征。

A new alkaline complex binder with low SiO2 content and good balling binding behaviour, substituted for bentonite binding which the main content is SiO2, is got by adding alkaline material to pellet bentonite.

济钢在球团膨润土中配加碱性物料，采用雷蒙磨细磨，试验成功了低SiO2含量、造球粘结性能良好的碱性复合球团用粘结剂，取代以SiO2含量为主的膨润土类粘结剂。

Clinical Application of WAB Organism Binder in Adhering Surgical Operation Incision

WAB生物粘合剂粘合手术切口临床应用体会

The large binder force is most effective to restrain springback among the concerning factors that influence the magnitude of springback. After analyzing the influencing factors of springback, one VBF pattern based on the modified micro genetic algorithm to control the springback was proposed in this paper.

在此基础上，本文对冲压件回弹量影响因素作了分析，并提出了一种基于改进微遗传算法的变压边力模型用于回弹控制。

CK 94 Binder for Ceramic Film Casting Technology

CK-94电子陶瓷流延成膜黏合剂

The structure, behavior and production process of powdered binder NJP-328 for pultrusion mat are emphatically introduced in this paper.

本文着重介绍了拉挤毡用粉末粘结剂NJP&328的结构、性能以及生产工艺等。

Right-click the scroll buttons in the left pane to see a list of the unhidden sections in the binder.

用鼠标右键单击左窗格中的滚动按钮可查看活页夹中未隐藏稿件的列表。

The sand molds or cores binder have high strength, good humidity resistance and excellent collapsibility.

砂芯有满意的湿强度,砂芯硬化后强度高,抗吸潮性强, 溃散性好.

To insure more densification but deformation of glass beads, the green density should be increased, and the burnout temperature of binder should be below the toplimit of transformation temperature.

为保证绝缘子获得较高致密度而不变形，应尽量提高生坯密度，同时排蜡温度应低于该种玻璃的转变温度上限。