composites的例句大全

And proper content of nano-Al 2 O 3 could improve dielectric breakdown strength of these composites.

适量纳米Al2O3可以提高材料的电击穿强度.

To satisfy these requirements, high dielectric constant composites attract more and more attentions.

这就要求人们不断研究和制备高介电常数复合材料.

The solution and aging behaviors of the composites are analyzed through effective diffusivity theoretical equation.

用有效扩散理论分析了颗粒增强复合材料的固溶时效特性。

Due to the excellent mechanical properties, in-situ ferrous matrix composites can be used in as-cast condition.

由于力学性能优良, 原位铁基复合材料可在铸态下直接应用.

Study on Chemical Reactions Between Metal and Carbon in Carbon/ Carbon Composites Containing Refractory Metal Distribution in Statistics of Wear Rate Data of Refractory Metal Carbide Coatings

混杂难熔金属C/C复合材料中金属与碳反应初步研究难熔金属碳化物覆层磨损率的统计分布

The Synthesis of Monofunctional Polyhedral Oligomeric Silsesquioxane and the Preparation and Characterization of POSS/ Epoxy Composites

含阴离子官能团物质与蒙脱土的相互作用研究单官能团倍半硅氧烷的合成及POSS/环氧复合材料的制备与表征

Summary on Mechanical Property Database of Domestic Carbon Fiber Composites

国产碳纤维复合材料力学性能数据库概述

The dispersing organic bentonites are the basic materials of preparation clay/ polymer nano-composites. Its parity between property and price is superior to compound nano powder materials. It is the study subject of preparation and application of composite material at present.

分散性有机膨润土是制备粘土/聚合物纳米复合材料的基础原料，其性能/价格比明显优于合成纳米粉体材料，是目前复合材料制备和应用领域的研究热点。

In this paper, the erosion test of three kinds of Filon composites in different chemical reagents is studied, and the corrosion resistance of these materials is compared.

本文通过三种Filon板在不同介质中的腐蚀试验，比较了它们的耐腐蚀性能，指出它们适合于不同的使用场合。

Comparison of corrosion resistance for Filon Composites

Filon板耐腐蚀性能的比较研究

Formation and Micro-Crystallization of In-Situ Bulk Amorphous ( ZrCuAl) AgY Alloy Composites SYNTHESIS OF PLASTIC Zr-BASED BULK METALLIC GLASS WITH CRYSTAL PHASE BY DIRECTIONAL SOLIDIFICATION

原位反应（ZrCuAl）AgY块体非晶复合材料的形成与微晶化机制研究定向凝固制备内生晶体增塑的锆基非晶复合材料

In this paper, the crystallization mechanism of synthesizing nanocrystal titanic in liquid media at low temperature is reviewed in detail. Formation and Micro-Crystallization of In-Situ Bulk Amorphous ( ZrCuAl) AgY Alloy Composites

详细介绍了晶态纳米二氧化钛低温液相合成的晶化机制。原位反应（ZrCuAl）AgY块体非晶复合材料的形成与微晶化机制研究

Internal Oxidation Kinetics and Recrystallization of Al_2O_ ( 3p)/ Cu Composites

Al2O3弥散强化铜内氧化动力学及其再结晶研究

Study on the Aging Hardening Behavior of Nano Al_2O_ ( 3P)/ 6061 Composites

纳米Al2O（3P）/6061铝基复合材料时效硬化特性的研究

Effect of particle size and morphology on microstructure and properties of Al_2O_ ( 3p)/ Al composites

Al2O（3p）/Al复合材料中颗粒粒径与形态对组织和性能的影响

The cell flaws seemed to act as water paths in these dosed-cell type composites . 7.

因该缺陷在闭孔型发泡复合物中形成水分之传走小径.

Preparation, Characterization and Potential Application of Montmorillonite and Palygorskite Nanometer Composites

蒙脱石和凹凸棒石纳米复合材料制备、表征和潜在应用

Infiltration processing and quality of C/ A1 composites are discussed under four conditions.

分四种情况讨论了C/Al浸渗复合过程和复合质量。

Effect of Matrix Strength and Fiber Strength Distribution on Tensile Fracture Behavior of B/ A1 Composites

基体强度和纤维强度分布对B/Al复合材料拉伸断裂特性的影响

Continuous-fiber-reinforced Cu matrix composites were fabricated based on the electrochemical infiltration technique ( ECI ).

基于电化学浸渗技术 ( ECI ) 在室温下制备了连续铜纤维、碳纤维和玻璃纤维增强铜基复合材料.