contact的例句大全

· METHODS: Forty patients ( 56 eyes) had undergone test of corneal endothelial cell density and cellular morphology by non-contact corneal endothelial microscope before and after trabeculectomy.

方法：采用非接触型角膜内皮显微镜，对40例56眼行小梁切除术的患者，做术前术后角膜内皮细胞密度和细胞形态学的检测。

The side slip angle, cornering force, aligning torque and cornering potential energy of the pneumatic tires were deduced. And the spring deformation energy and damping-force potential energy of the wheel-rail radial contact were also deduced. 4.

推导了充气轮胎的侧偏角、侧偏力、回正力矩和侧偏势能，也推导出了承重轮、导向轮的轮轨接触弹簧变形能和粘性阻尼力势能。

No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.

对于不同内部介质接触的部件，如外表面、防护罩及支承凸缘等不需腐蚀余度，地脚螺栓除外。

The results of salt spray test and contact corrosion test further approved the same conclusion.

从盐雾试验和接触腐蚀试验结果进一步证实这一结论：注入试样比非注入试样在抗蚀性方面提高很大。

Exploration for Contact corrosion of Ti and Ti-Alloy and Protective Test

钛及钛合金接触腐蚀与防护试验探讨

The contact corrosion characteristics of hydraulic concrete have been studied in this paper.

本文通过试验研究了水工混凝土的接触溶蚀性能。

Contact corrosion of carbon-copper couple in 3% NaCl aqueous solution had been studied.

研究了3%NaCl溶液中碳-铜短路体系的接触腐蚀行为。

The contact corrosion of anodized titanium alloys

阳极化钛合金的接触腐蚀

The contact corrosion occurred between Ti or Ti-Alloy Parts and other metals in the aircraft structures is described in this paper.

本文叙述了飞机结构中钛及钛合金件与其它金属件之间所发生的接触腐蚀。

Response Analysis of an Electrical Contact System to an Arbitrary Forcing Function

触头系统在任意力函数作用下的响应分析

The author analyzed the relationship of cut angle, cut depth and teeth contact force. The conclusion of analysis soft is similar to the results of experiment.

分析了斗齿切入角度、切入深度与斗齿接触力的关系，所得到的结论与利用静力触探仪试验的分析结果相似。

Study on Effect of Filter Cut-off Frequency on Rough Point Contact Mechanism

滤波截止频率对粗糙点接触机理影响研究

The three-dimension finite element precise model of helical gears is established and impacting calculation is made in this model, the von mise stress, contact pressure and distortion are compared with in different engaging speed and time.

建立了斜齿轮三维有限元精确模型，并进行了冲击有限元计算，综合比较了在不同接合转速、不同接合时间工况下，斜齿轮各部位的应力、接触压力和变形状况；

Study on solution of engaging tooth contact point trace line by network method

网络法求解相啮合齿面接触迹线的研究

Adjustment on the Non-contact Measurement Method of Wearing Capacity of Visco-elasticity Material

粘弹性材料磨损量非接触测量法的修正

The wearing depth distribution of different contact positions of typical kinematic pair is discussed.

研讨了典型运动副不同接触位置的磨损深度分布情况。

The static and/ or dynamics contact characteristic, transmission behaviors and dynamics transmission error are affected by gear mesh elastic deformation, tooth impact, backlash, manufacturing error, tooth modification and assembling error in the mesh process.

齿轮啮合时轮齿的弹性变形、啮入啮出冲击、齿轮间隙、制造误差、修形、装配误差等都对轮齿静、动力接触特性、系统动态性能、系统传动精度等有很大影响。

The finite element model, which is composed of JM worn type of locomotive wheel, standard 60 kg/ m rail, rail fastening, rubber tie plate and ballast bed, well simulates actual wheel-rail contact state.

建立的机车JM型磨耗型踏面、60kg/m钢轨、扣件、橡胶垫板和道床等有限元模型更加真实地模拟了轮轨接触状态。

Experimental Study on Contact Behavior of a Bald Tyre

花纹磨光轮胎接地特性试验研究

The identified mechanisms of bacterial corrosion are essentially important physico-chemical modifications of the medium in contact with the material.

生物腐蚀的机理对金属接触的介质物化调整来讲是非常重要的。