crack的例句大全

We are resolved to crack down on the person who commits violations of law and discipline.

坚决制裁违法乱纪分子.

The results show that the fracture mode of blade is vibration fatigue and the main cause of initiation of fatigue crack is the mismatch between rabbet and tongue-and-groove.

结果表明，叶片的断裂模式为振动疲劳，叶片榫头与榫槽配合不当是萌生疲劳裂纹的主要原因。

Crack Analysis on Rabbet of Grade ⅰ Turbine Disk of an Engine

某型发动机Ⅰ级涡轮盘榫齿裂纹分析

Crack detection of turbine disc mortise of aero-engine by nondestructive testing

发动机涡轮盘榫齿裂纹的探测

The pressure of the water caused the wall of the dam to crack.

水的压力使堤坝决口.

Along the waters edge ice crystals grew , and listening closely, we heard the crack of freezing.

水边正在结冰, 细听之下, 有结冻的“咔咔”声.

A crack or flaw caused by the removal of a small piece.

因缺少了一小片而造成的裂口或瑕疵.

There was a deep crack in the ceiling above him.

在他头顶的天花板上有一道很深的裂缝。

The crackers went off with a crack.

鞭炮噼啪响.

Can increase genuine leather's transverse tear strength, grain surface crack intensity and tensile stretch after using.

使用后可有效增加真皮的抗撕裂强度 、 粒面崩裂强度,还可增加真皮的伸长率.

Advantage: Not easily occurred a crack, gap and collapse during the cutting.

优点: 切割加工时不易产生裂角 、 缺口、崩裂现象.

There is a crack in the wall.

墙面开缝了。

It can be concluded that the two factors, mechanics and metallurgy, co-work to prevent hot crack.

随焊电磁冲击防止热裂纹的机理可以归结为冶金因素和力学因素共同作用的结果。

The crack reasons of the boiler economizer U shape tube were analyzed by means of chemical analysis, fractography and metallography examination.

通过检测化学成分、宏观断口及金相组织等，对锅炉省煤器U形管裂纹进行了分析。

An Analysis on Crack of the Boiler Economizer U Shape Tube

锅炉省煤器U形管裂纹的分析

Vargas pulled out his gun. Crack! The snake was blown to pieces.

瓦格斯掏出枪. 砰! 蛇被打成了几段.

Qualification and Research on the Cold Crack Sensitivity for the Fusion Zone of 9% Ni Steel Welding

9%Ni钢焊接熔合区的冷裂敏感性评定与研究

Therefore, it is necessary to reasonably decreasing the cool rate after welding process for improving the ability of anti-fatigue crack initiation in the weld heat affected zone. 5.

因此在焊接时适当地降低热影响区的冷却速度，可以使焊接热影响区获得更优的抗疲劳裂纹萌生能力。

In this paper, by establishing the finite element model the construction load conditions at the suspending end of the box girder are simulated, the crack causes are studied, and several preventive construction measures are also proposed.

文章通过建立空间有限元模型，模拟并分析了箱梁悬臂段施工过程中的荷载效应，探讨了裂缝产生的原因并由此提出了相应的施工措施；

Any crack in that front could be fatal for tech companies that must operate worldwide.

人们对这种信念哪怕有一丝动摇，对那些必须在全世界开展业务的技术公司来说，都可能是致命一击。