cracking的例句大全

Unsaturated polyester resin ( UPR) wastes pyrolysis was cracked to prepare feed stock, and process conditions of catalytic cracking reaction were introduced systematically.

对不饱和聚酯树脂（UPR）废料裂解制原料油技术进行了研究，系统地考察了催化裂解反应工艺条件。

Optimization Control for Cracking Severity of SRT-ⅳ Heavy Oil Cracker with VAX Computer

SRT-Ⅳ型重质油裂解炉基于VAX机的裂解深度优化控制

Research and Development of Fault Diagnosis System for Catalytic Cracking Process

催化裂化反应故障诊断系统的研究与开发

Fluid catalytic cracking process dynamic model and simulation ──ⅰ. process dynamic model

催化裂化过程动态模型及仿真&Ⅰ.过程动态模型

Development and Application of Industrial Catalytic Cracking Process Online Calculation

工业催化裂化过程在线工艺计算技术开发与应用

Development of ethylene production using heavy oil contact cracking process

重油直接裂解制乙烯技术的开发

Constitutive damage model and its numerical method of cracking process of masonry structure

砌体结构开裂过程细观损伤数值模型及其分析方法

Study on Lumped Kinetic Reaction Network of Heavy Oil Contact Cracking Process

重油接触裂解制乙烯集总反应动力学模型研究

An Energy Approach to Dynamic Cracking Process

动态致裂过程的能量分析

The stresses from the structural analysis are combined with the pavement distress models to predict the rutting and fatigue cracking of pavement, and compared with the measured distress.

接著将结构分析结果与破坏模式结合预测铺面在车辆反覆荷重所造成之车辙与疲劳龟裂，其结果亦与观测值作比较。

Experimental Research on the Threshold Value of Fatigue Cracking of High Strength Steel

高强度钢的疲劳裂纹门槛值实验研究

Study on random wave force spectrum and structural fatigue cracking propagation

随机波浪力谱及结构件裂纹扩展研究

Study on Characteristic of Thermal Fatigue Cracking Damage of Wheel Casting Steel

车轮铸钢热疲劳裂纹损伤行为研究

Fatigue cracking is one of the main failure mode of asphalt pavement.

疲劳开裂是沥青路面的主要破坏形式之一。

Corrosion Fatigue Cracking of In-service 4340 Steel Super High Pressure Pipe

在役4340钢超高压管的腐蚀疲劳开裂

With increasing corrosion time the impact toughness of high Mn steel obviously decreased. The major mechanism was effect of the caustic embrittlement cracking.

随着热强碱腐蚀时间的延长，高锰钢的冲击韧度明显降低，碱脆开裂是造成高锰钢冲击韧度下降的主要原因。

The results showed that the corrosion weight loss rate of high Mn steel was distinctly greater than that of medium carbon chromium steel. The high Mn steel caustic embrittlement cracking was distinct in corrosion.

结果表明，高锰钢的平均腐蚀速率显著高于中碳铬合金钢，腐蚀过程中高锰钢有较严重的碱脆开裂现象。

With an increase of the chromium content in the cast steel, active dissolving corrosion increased, however, tendency of caustic embrittlement cracking decreased.

随着钢中含铬量的增加，试验材料的活性溶解腐蚀失重增大，但碱脆开裂的倾向减少。

Effect of cold work on the caustic stress corrosion cracking of alloy 800

冷加工对800合金抗碱性应力腐蚀破裂的影响

The experimental results show that steel fiber reinforced self-stressing concrete can significantly increase the cracking load of penstock.

试验结果表明，钢纤维自应力混凝土能够明显地提高压力管道的抗裂承载力。