gear的例句大全

Motion Analysis of the Planetary Gear Drive of the Double Crank Type

双曲柄式行星齿轮传动的运动分析

New Method of Transmission Error Analysis for Cycloid Drive in Three Gear Double Crank Ring-Plate-Type Cycloid Drive

齿轮传动齿轮传动装置三齿轮联动双曲柄环板式针摆行星传动中针摆传动误差分析的新思路

Principle and Application of the Additional Weight Balance of Micro-amplitude Mechanism Driven by a Crank Gear

曲柄机构传动的微幅振动机械的配重平衡平衡重，配重作为一种抗衡的重量

Special Milling Machine for Crank Gear of Pumping Units

抽油机曲柄齿专用铣床

On parametric feature lib of internal combustion engine crank gear

内燃机曲柄连杆机构参数化特征库研究

The Influence of Parametric Deviation of Crank Gear On Dynamic Balancing Quality or Internal Combustion Engines

曲柄连杆机构参数偏差对内燃机动力平衡性能的影响

The kinematics characteristic of a press slide can be changed obviously by the ellipse gears and crank gear in series.

具有变速传动特性的椭圆齿轮机构串联曲柄滑块机构能够明显改变传统压力机滑块的运动特性。

The disadvantage that non-geometry engineering information can not be expressed by geometry model is solved by definition, classification of feature and foundation of feature lib. And this is the base to generate various similar complex component of the crank gear and the base to information reapplication.

通过特征的定义、分类及特征库的建立，解决几何模型无法表达非几何工程信息的缺点，并且为曲柄连杆机构中复杂的各种相似零件模型的计算机辅助生成，和信息的重复使用提供实现基础。

We're unable to crank landing gear down.

我们无法摇下起落架。

Counter crankshaft rotation The steering wheel is mounted on a steering shaft that extends into the steering gear.

反曲轴转动方向的转动转向盘安装在转向轴上，转向轴延伸至转向器。

Therefore, the finite element method was used in this article to systematically study the Interference technology of the crankshaft gear.

为此本文利用有限元方法，对曲轴齿轮过盈联接技术展开了系统的研究。

The relation between the related structural dimensions of interference fit, the contact state, the running state and the crankshaft gear stress was mainly investigated.

重点探讨了过盈联接相关结构尺寸、接触状态以及运转状态等因素与曲轴齿轮应力的关系。

The study showed that the structural dimensions played an important role the crankshaft gear stress. Based on these, on analyze the impact law of the structural dimensions affect to the interference fit was mainly focused.

研究表明结构尺寸对曲轴齿轮应力影响较大，在此基础上着重分析了结构尺寸对过盈量的影响规律。

Control of Positional Accuracy for Keyways in Crankshaft Timing Gear Journals

曲轴齿轮轴颈键槽位置精度控制方法

The dental abrasive testing machine applies a V-like swing arm to driving the wearing part to move along the slope back and forth, which is connected with an eccentric wheel fixed on the crankshaft of the gear motor through a connecting rod.

该机采用V形摆动臂来驱动磨耗部分沿斜面作往复磨耗运动，V形摆动臂通过连接杆与减速电机轴上的偏心轮连接。

Application of Roll Crusher with Four Gear Teeth in CFB Units

四齿辊式破碎机在循环流化床机组中的应用

The flow rate calculation is usually based on the variable of cubic content, which will ignore the influence of the cubic content in working capability of gear pump.

以往流量计算多以容积的变化量计算为基础，这势必忽略了齿轮泵工作腔容积对齿轮泵工作性能的影响。

The safety curtain shall be capable of being released automatically by means of fusible link or other automatic fire detecting system and incorporated with a hand release-gear.

隔火帐必须附有手按放松装置，其自动放下之操作可使用安全连捍式或其他火警自动侦探系统。

Analysis on Tooth Surface Curvature of Equal-Base-Circle Bevel Gear

等基圆锥齿轮的齿面曲率分析

Calculation of Side Cutting Edge Angle of Gear Shaping Cutter

插齿刀侧刃切削角度的计算