introduced的例句大全

The composing, function, selecting principle and key of parts of the pump, such as electromotor, axle-jointer, bearing box seat, water cooling seal cavity, down pump body, pump axle and impeller, are introduced in detail by pump body structure diagram.

给出泵体结构图，详细介绍泵的电机、联轴器、轴承箱座、水冷密封腔、下泵体、泵轴、叶轮等部件的组成、功能，各部件的选型原则和关键点。

The task communication cost used for receiving and sending a data set depended on the assignments of other tasks, so the mean estimate was needed to be introduced into the task communication cost when the assignments of related tasks were not completed yet.

任务用于收发数据集的通信成本依赖其他任务的指派，故当相关任务的指派未完成时，需要在任务通信成本中引入均值估计。

Last day, Professor Ballinger Lewis introduced you to Lewis who taught us that octet stability could be achieved via electron sharing as an alternative to electron transfer.

昨天，ballinger教授，把我介绍给，他教我们八隅律可以，作为电子传递的方式，可以通过共享电子来实现。

The diffusion coefficients of atoms which strongly dependent on their local concentration are given in the nonlinear kinetic discrete model for diffusion in nonuniform system, and the diffusion asymmetry coefficient m' and the ordering energy V are introduced to describe the diffusion in nonuniform system.

根据非均匀体系的非线性动力学离散模型推导出与局部原子浓度强相关的原子扩散系数，引入扩散非对称性系数m′和有序能V参数描述非均匀体系的扩散。

Cross-evaluation has also been introduced to overcome some defects from the CCR model of Data Envelopment Analysis and achieved complete ordering of these objects.

同时，为了克服数据包络分析的CCR模型的一些缺陷，在研究中引入了交叉评价的方法，实现了研究对象之间的完全排序。

According to spatial distribution feature of ore body, the special 3D data model and data structure have been designed. The method of establishing spatial 3D data structure by means of 2D contour lines forming 3D shape and using Morton codes is introduced.

本文根据地矿的空间分布特征，设计出专用的三维空间数据模型及数据结构，介绍了由二维轮廓线构造三维形体，Morton码建立空间三维数据结构的方法。

The control system of performance tester for auto combined switch is introduced in this paper.

介绍一种汽车组合开关综合性能试验台的控制系统。

Necessity of the hydraulic conveying is analyzed hereof. Current status, development trend and key point of system design have been introduced also.

对聚烯烃颗粒物料采用水力输送方案的必要性作了分析，并介绍了水力输送技术的发展状况及设计要求。

A combination of pallet racks, AS/ RS is introduced, furnished with stackers and other automatic conveying systems and operational softwares.

自动化立体仓库是高位托盘货架的组合体，并配以堆垛机和其他自动化转输系统和操作软件。

A measuring method using a vernier caliper to determine the error of position for evenly divided holes along a circle is introduced.

本文介绍采用游标卞尺测量圆周均布孔组位置度误差的方法，提出用极座标法和弦长法两种方法计算其误差值或验收公差。

According to Fu Jian Gymnasium project, this paper introduced technology of plant nail to stick facing stone.

本文结合福建省体育馆工程实际，介绍了饰面石板植钉锚固点贴施工技术。

A new type of pipe clamp for facing machine is introduced. It is analyses that the characteristic and property, working principle, property index, location precision and so on for the pipe clamp.

介绍了一种新型钢管管端平头机的夹管机构，对夹管结构的特点和性能、工作原理、性能指标、定位精度等作了描述和分析。

Studies on the Effect of Forcing Culture on the Growth of Thunberg Fritillary ( Fritillaria thunbergii) Introduced from South China to the Northern Region

促成栽培对浙贝北引生长效应的研究

The design of bending forming mill of solar energy water-heater support, which is applicable to the village usage, was introduced.

介绍了适用于农村使用的太阳能热水器支架弯曲成形机的设计。

In the following, driver's starting intention is introduced to control clutch engaging time, then basing on these vehicle dynamics models, the clutch optimized engagement rule and relative bus dynamic characteristic diagram is worked out by multitarget optimizing.

接着引入驾驶员的起步意图来控制离合器的接合时间，并结合已建立的车辆动力学模型，通过多目标优化，求解出离合器最佳接合规律及基于此规律下的客车动力特性。

Results: composite materials exhibited the characteristic of the ordered liquid crystal domain when introduced ordered and flowing cholesteryl liquid crystals into PU, and the anti-clotting properties of the one got improved.

结果：在聚合物基材中加入亲水性的胆甾醇液晶可使复合材料表面呈现有液晶微区的有序结构特征，复合膜表面的抗凝血性能提高；

Ground dyeing with KN type reactive dye and non-fixation on cotton fabric, and then printing with K type reactive dye are introduced.

介绍纯棉织物以KN型活性染料染底，但不固色，再以K型活性染料印花入色的活性防活性印花工艺。

In addition, the processing conditions and technologies of dope dyeing method for the colored meta-aramid fibers produced were introduced in detail.

同时介绍了原液着色方法制备间位芳香族聚酰胺有色纤维的工艺与条件。

How to set the automatic adjust system in the process of accelerated cooling of hot rolled tube, and the design idea and method of software and hardware which were used to the automatic inspection and controll were introduced.

介绍了在热轧钢管加速冷却的工艺过程中如何建立自动调节系统，以及用来实现自动检测和控制所需要的软、硬件的设计思想和设计方法。

The general occurrence and distribution of internal surface hollow and hole defect of hot continuous rolled seamless tube are introduced.

介绍了热连轧无缝钢管内表面凹坑、孔洞缺陷的基本形式和分布规律。