joint的例句大全

The vehicle must be raised in order to check the lower axle joint on the wishbone.

为检查横向控制臂上的下轴接头，必须举升车辆。

On special application, Pacific valves can be supplied with special end flange facings other than the raised face or ring joint.

对于特殊的应用环境，美国太平洋阀门可提供与凸面或环连接不同的特殊端口法兰面。

Tokyo and Beijing appear close to agreement on joint development of natural gas fields in disputed waters of the East China Sea, a deal that would resolve one of the most contentious issues to strain Sino-Japanese ties in recent years.

日中两国看来接近达成在东海（East China Sea）争议水域共同开发天然气田的协议。这项协议将有助于解决一个近年来最富争议的、造成中日关系紧张的议题。

On the Close Relations between Pipeline Joint and Pipework

管道接口与管道工程关系的探讨

Whatever shapes of solder joints, under the thermal loading, the distribution of the largest equivalent Von Mises stress/ strain are all approximately same which is in the brim of solder close to the joint of solder and PCB.

研究发现，在热载荷作用下，鼓形、凹形及柱形钎料焊点的最大应力应变分布大致相同，均在钎料球的外边缘。

Close the Joint Display Scale window.

关闭关节显示比例窗口。

Results ( 1) The lanthanum nitrate tracing electron microscope showed that the lanthanum granule ap-peared at the place of close joint at 0.5 h and 2h;

结果（1）硝酸镧示踪电镜结果：再灌注0.5h和2h，镧颗粒出现在紧密连接处；

Numerical simulation on sliding of close joint in rock mass and evaluation on its mechanical behavior

岩体闭合节理摩擦滑动模拟与力学行为研究

The article introduces the basic conception of worker's ownership company and its main characteristics briefly and holds that the joint-stock company of worker's ownership is a direction of the state-owned business enterprise reform, with Nanjing Engine Fittings Factory as an example.

简要介绍了工人所有制公司的基本概念和主要特征，认为工人所有制的股份公司是国有企业改革的方向，并用南京发动机配件厂改制实例作了印证。

Damage to the bonded joint if the waiting time is not observed before further work!

如不遵守等待时间而急于展开下一步工作，粘合处将受损！

Nonlinear Model of Bolted Joint and Its Wave Energy Dissipation

螺栓接头非线性模型及其波能耗散

Strength studies on non-even distribution bolted joint in composite laminates

复合材料非均匀分布多钉连接强度研究

A Test Research on Fretting Damage of Bolted Joint and Its Coating Glue Protection

螺栓联接件的微动损伤及其涂胶防护试验研究

Results showed that the ductility of bolted splice joint is much better than that of the welded one;

试验结果表明：螺栓拼接节点的延性远好于梁柱焊缝连接；

In this study, effect of cyclic load on the vacuum tightness of the adhesively bonded joint was investigated experimentally.

该文实验研究了循环载荷对粘接接头气密性的影响。

Review on residual thermal stress of ceramic bonded joint with metal

陶瓷与金属焊接接头残余热应力研究

The results showed that the aging of epoxy bonded joint in water was accelerated by increasing temperature.

结果表明，提高温度可以加速环氧胶接接头在水中的老化；

TEM study of bonding layer in Cu-Al explosively welded joint

Cu－Al爆炸焊结合层的透射电镜研究

Ultrasonic aluminum wire bonder and ultrasonic gold wire bonder are mainly applied to joint the chip pad with the lead-frame in the later process of semiconductor producing.

超声铝丝焊接机和超声金丝球焊接机主要运用于半导体生产后工序中芯片焊盘与外框架间引线的焊接。

Fatigue Design of Bolted Joint in a Steel Structure

金属结构中螺栓联接的疲劳设计