layer的例句大全

A thin layer of ice formed over the lake.

湖面上凝结了一层薄冰。

A thin layer of ice is formed over the lake.

湖面上凝结了一层薄冰.

Structure and property on chromium alloy layer by double glow discharge technology

双层辉光离子渗Cr合金层组织和性能

Study of the effect of slurry trench on concrete cut-off wall in deep sand gravel layer

护壁泥浆对深厚砂砾石层混凝土防渗墙影响的研究

Water Controlled Coal Mining Technology Under Cracking Strata of Super Thick Gravel Layer with High Pressurized Water

高水压巨厚砂砾层裂隙岩体下控水采煤技术

The behavior of grouting pile inserted into sand or gravel layer under axial load

嵌入砂或砂砾层中的桩底灌浆桩竖向承载性能研究

Discussion on sand and gravel layer foundation of concrete faced rockfill dam

砂卵砾石层作为混凝土面板堆石坝坝基探讨

Field test study of methods for supporting large-section inclined shaft in gravel layer

卵砾石层大断面斜井井筒支护方法现场试验研究

Construction Quality Control On Thick Gravel Layer Punch Pile

深厚卵石层冲孔灌注桩施工质量控制

A Study on Permeation Grouting in Gravel Layer and Application

砂砾层渗透注浆机理研究与工程应用

Middle Pleistocene strata: gravel layer; sand, coarse sand interbedded with gravel layers; gravel layers.

中更新世：砾石层；砂、粗砂与砾石层互层；砾石层。

Settlement calculation and control analysis of sluice on deeply covered layer of sandy gravel

砂砾石深覆盖层上水闸沉降计算与控制分析彩砂涂料的特性和应用

Application of Sandy Gravel in Drainage Cushion Layer for Soft Road Foundation

砾砂在公路软基排水垫层中的应用

Effective granulation is the formation of granular structure with return as core and concentrate fines as adhering layer.

机理研究表明：理想的制粒效果是形成以返矿为核心，以细粒精矿的粘附料的制粒小球结构模型。

Homogeneous and golden yellow layer without defects.

光亮金黄色，色泽均匀。

Results were obtained only for a surface layer on the tensile side of the plate.

只能在板的受拉侧的表面层得到结果.

Tao Tao Shaguo by mud and sand mixture produced from, the surface layer of glaze.

陶沙锅是由陶泥和细沙混和烧制而成, 表面有一层釉彩.

Aim To study the conducting heat properties of the crystal surface layer will be studied.

目的研究晶体材料表面层中的导热问题.

To surface layer of soil from ( land ).

地球表面一层的土壤.

The electrochemical machining process generally does not change the surface layer properties significantly.

电解加工一般不会显著地改变工件表面层的特性.