simulation的例句大全

Numerical Simulation of Mold Filling and Solidification and Experimental Analysis in Furnace Grate Investment Castings

炉排片熔模铸造充型与凝固过程的数值模拟及验证

With the help of the process simulation software-PRO-ⅱ, the impact of variation of feedback temperature of rich absorption oil on the energy recovery and the operation of the main fractionator in fluid catalytic cracking or delayed coking units was analyzed in detail.

借助流程模拟软件PRO／Ⅱ详细分析了吸收稳定系统富吸收油返回催化裂化或延迟焦化主分馏塔温度对操作及热量回收的影响。

The Application of Dynamic Simulation in Catalytic Reforming Process

催化重整全流程动态模拟及实际应用

Numerical simulation on disposal of abandoned stopes by means of ore pillar caving

矿柱崩落法处理采空区的数值模拟

Discrete Element Simulation of Ore Drawing by Caving Method in Mining

崩落采矿法放矿的离散元仿真

The height of the watering fissures is 21.5m because the height of caving zone is about 10m after the mining of all the 3 seam ( 4 layers), and the result basically accord to the result of theoretic calculating and numerical simulation;

3煤层全采后（4个分层）垮落带高度为10m左右，导水裂隙带的高度为21.5m，与理论计算和数值模拟结果基本一致；

Numerical Simulation Study of Rock Mass Caving Mechanism

岩体崩落机理的数值模拟研究

Simulation of ore drawing process in mass caving mine

连续开采型自然崩落法出矿生产系统模拟

Development of reliability simulation software for fully mechanized caving system with parallel operation

平行作业综放系统可靠性模拟软件的开发

Simulation Test Study and Theory Analysis to the Cavitation Corrosion in the Efflux Element

射流元件空蚀模拟试验研究及理论浅析

Numerical simulation study of forward smoldering propagation of cellulosic material in a horizontally packed bed There are front and back and inside and outside among the layers of clouds.

水平填充床中纤维质燃料正向阴燃数值模拟研究云有反面正面，有阴阳向背，有层次内外。

Computer simulation of dynamic cementing process

注水泥动态过程的计算机模拟

Simulation of face-centered cubic lattice's First Brillouin zone with 3-dimensional animation

面心立方晶格第一布里渊区的三维动画模拟

Study of link travel time functions for dynamic traffic assignment model based on computer simulation

动态交通分配中道路阻抗模型的研究

The controller design which satisfies the demand of steady state error is presented by examples when the reference inputs and disturbance signals are step functions, sine functions, and other typical signals, and simulation results are given.

通过具体例子给出了参考输入和干扰信号为阶跃函数、正弦函数、方波函数等典型信号时系统满足稳态误差要求的控制器的设计方法，并给出计算机仿真结果。

Three-dimensional Dynamic Quasi-function Technology Study of Oil Deposit Numerical Simulation and Its Practical Application

油藏数值模拟三维动态拟函数技术研究及实际应用

In this paper, a simulation of the fixated by pulse function is used;

用双三次不等距的脉冲函数来模拟集中力，解决了旋转壳内附加环这一新设计的力学问题；

The Application of Noise Function in Real-time Cloud Simulation

噪声函数在实时云彩仿真中的应用

Simulation of the hydrolytic polymerization of ε-caprolactam& the study on the affacting factors for the distribution of polymer compositions under the monofunctional regulator

己内酰胺水解聚合过程的计算机模拟&单官能团酸调节剂下影响因素研究

According to the completed simulation test, draw up function on the temperature change condition of asphalt concrete in the side board of tip truck, and carry on conformity to the three group function.

按照已经完成的仿真，对自卸车侧板处的沥青混合料的温度变化情况进行函数编制，并对已经编制的三组函数进行整合。