simulation的例句大全

Dynamic stress intensity factor impulse response curves are obtained. The dynamic initial fracture time, tf, can be received by RKR local stress fracture criterion. The material dynamic fracture toughness is successfully obtained from numerical simulation.

起裂时问通过RKR局部应力断裂准则获得，结合计算得到的动态应力强度因子冲击响应曲线，最终得到材料动态断裂韧性，并验证了其有效性。

The simulation experiment in balancing control of inverted pendulum shows that the proposed RHC strategy is correct, and the realization of infinite horizon closed-loop optimal control is feasible by integrating with rolling optimization idea.

应用于倒立摆平衡控制的仿真实验说明了论文提出的移动域控制策略的正确性及与滚动优化思想相结合实现无限域闭环最优控制的可行性。

Delay Computation Due to Collision between RBT and BRT Based on Stochastic Simulation

基于随机模拟的RBT与BRT冲突延误计算

PSPICE Simulation of Chaos Dynamical System Including PWL Elements

含分段线性项的混沌动力学系统的PSPICE电路模拟

The simulation results show it can improve the computational efficiency of PTN mesh topology design.

模拟仿真结果表明，该算法有效地提高了设计满足业务需求PTN网状网拓扑的计算效率。

The simulation results show that the QoS of real-time traffic is guaranteed in QUR, and QUR achieves better performance in terms of throughput and control overhead compared with DSDV.

仿真结果表明：QUR协议保证了实时业务的服务质量，在网络吞吐量和相对控制开销方面优于DSDV协议。

With the simulation of the procedures of temperature descending and ascending in day and night on QTR, the temperature difference between steel and concrete were tested with FZS Temperature Auto Testing System.

采用FZS型温度数据自动测试系统，模拟青藏线昼夜降温、升温过程，对钢与混凝土的温差做了测试。

This paper establishes the mathematical model of quad redundant actuator ( QRA), investigates the force equalization algorithm and carries out the performance degradation simulation and reliability analysis under the first failure and the second failure.

在建立四余度舵机数学模型的基础上，研究了力均衡算法，对四余度舵机一次故障、二次故障情况下的性能降级和可靠性进行了仿真分析。

The Application of Simulation and QPT Technology on Marine Diesel Engine's T/ V Calculation

仿真与快速通过（QPT）技术在船用柴油机扭振计算中的应用

The simulation of total energy flow and the density of states show that the dodecagonal QPC has photonic gap for TM polarized electromagnetic waves.

能流和态密度的计算结果都表示十二重准晶光子晶体具有光子带隙。

Qne Kind of the Simulation of Chaos Modulating Secrecy Communication Circuit

一种混沌调制保密通信电路仿真研究

In a large scale real time simulation system, methods to reduce disk I/ O time at the ACP QIO I/ O interface as well as to improve the real time performance in a multiple processes environment, are introduced in this paper.

本文以一个大型实时仿真系统为背景，介绍了在ACP－QIO这一I／O层次减少磁盘I／O操作时间的诸多方法，以及在多进程环境下提高进程实时的一些措施。

Computer Simulation of PMW-Type

一种PMW型四相控制开关电源的计算机仿真

Simulation results demonstrate that this mechanism can depress PLR and improve QoS performance of MDC transmission with MPT.

仿真试验验证了该机制可有效降低传输丢包率，改善多描述符编码多径传输的服务质量。

Test& analysis of PKE system. First, electromagnetic fields inside the vehicle, is deeply researched by the means of simulation and calibration.

PKE系统测试分析，首先通过软件仿真和实车标定，深入研究车内低频磁场分布特性。

Application of Numerical Simulation in the Preparation of Zn-Al Based A1_2O_ 3 Ceramic Film with Laser Remelting Process

数值模拟在激光制备锌铝合金基氧化铝陶瓷复合层材料研究中的应用

The simulation software is designed based on modularization method. It can fulfill the function of scene setting, PDW production, pulse sort and overlapping disposal.

论文采用模块化的设计思路对模拟器软件进行了开发，仿真软件能完成场景设置、脉冲描述字生成、多信号脉冲排序、脉冲重叠处理等功能。

With the P-III distribution taken as an example, the statistical characteristics of the PNT method were investigated by means of the Monte-Carlo simulation.

以PⅢ型分布为例，用Monte Carlo法进行模拟分析，并对PNT法的统计性能与线性矩（LM）法的统计性能进行了比较。

This thesis combines the object-oriented ideas with the basic theory of Petri nets to develop a visual tool of Petri nets and the simulation of the flexible manufacturing systems. A PNT is a type of files to represent the information of Petri nets.

本文将面向对象的思想和Petri网基本理论相结合，开发出Petri网可视化工具并对相应的柔性制造系统（FMS）模型进行仿真。PNT文件是一种保存Petri网信息的文件。

Realizing Class-Based High Efficiency Simulation& Verification Environment with OVM

利用OVM实现基于Class的高效仿真验证环境