solidification的例句大全

Effect of thermosolutal convection on morphological stability of al/ alli eutectic during directional solidification

定向凝固时热溶质对流对Al/AlLi共晶生长形态稳定性的影响

Curing: The rapid solidification of ink or varnish by means of chemical action.

固化: 用化学方法使油墨或光油速变成固体.

Oxidation and aromatization phenomena in solidification process of asphalt paint

沥青清烘漆热固化过程中的氧化与芳构化

Treatment of Arsenical Sludge Solidification

含砷污泥的固化处理

We added echinocandins and azoles to CHROMagar Candida medium prior to its solidification.

在显色琼脂固化之前，向显色琼脂念珠菌培基中加入棘白菌素和唑类。

The Analysis and Mathematical Model of Atomizing Solidification of Alloy Droplet

合金液滴雾化凝固过程分析与计算模型

When curing temperature was preferred to be 260 and the percentage of solidification agent was 3 %.

固化剂质量分数为3%,固化温度为260℃时得到的膜的性能最佳.

In welding process, under arc light, how to photograph the starting and expasion process of weld solidification crack is studied in this paper.

研究了在实际焊接过程中的电弧光下如何拍摄记录焊缝凝固裂纹的启裂和扩展的过程。

Classifying Degree of Solidification of Acidulated Waste Water in Oil Field Using Fuzzy Comprehensive Assessment

模糊综合评价法划分油田酸化废水的固化等级

Research on the solidification of acidulated wastewater

酸化废水固化处理实验研究

Summary of cement solidification process for borated waste solutions

含硼废液水泥固化技术综述

Technology of soil solidification in civil engineering is always pay close attention to.

土料的固化技术一直以来在土木工程领域中都是备受关注的课题.

A new-style rapid solidification 100% solid polyurethane technology was put forward to solve the remarkably erosion-corrosion problem of amphibious armored vehicle chassis and buoyancy compartment. The characteristics, principle, and autoptic application of the coating technology was introduced in detail.

两栖装甲车辆底盘、浮箱表面的磨损腐蚀情况严重，采用新型的快速固化100%固体含量聚氨基甲酸乙酯涂料技术对其进行综合防护，介绍了该涂料的特点、原理。

It is of significance to prepare TiAl-based alloys by cold crucible electromagnetic confinement and directional solidification technique because of its unique features without contamination and continuity during process.

冷坩埚电磁约束成形与定向凝固技术对于探索高质量钛铝基合金的制备成形具有重要意义。

Experimental study of thermal convection during the water solidification process in cylinder cavity

圆柱腔体内水凝固过程热对流实验研究

Lastly, effects of annealing under high magnetic field on the structure of spheroidal graphite cast iron, gray cast iron and 45# steel were investigated. The solidification of Al-12% Si under high magnetic field was also carried out.

最后本文还分别进行了灰铁、球铁、45钢强磁场下退火处理，以及Al&12%Si合金强磁场下凝固实验，并对实验结果进行了分析。

The experimental results of continuous casting of hollow tubes showed that there were many problems such as poor surface quality, too many faults, and coarse crystalline grains in solidification structure and poor uniformity of structure in the circumferential direction.

低熔点的Sn-Pb合金空心管坯连铸模拟实验表明，连铸管坯存在表观质量差、缺陷多、凝固组织晶粒粗大且周向分布均匀性差等问题。

A Review of Three Kinds Determination Method for Melting Point, Crystallizing Point and Solidification Point

熔点、结晶点和凝固点三种测定方法的评述

An explicit finite& difference method ( FDM) was used to model and simulate the solidification of eutectic cast iron by combining heat transfer equations with undercooling nucleation and growth laws.

综合热传导方程与过冷形核、生长规律，用显式有限差分法模拟了共晶铸铁的凝固过程。

ANSYS software is used to compute the influence of rotate magnetic filed on the solidification of clad hollow billet.

采用ANSYS软件模拟旋转磁场对管坯凝固过程的影响。