strength的例句大全

The Water absorption ( Wa), Porosity ( Pa), Bulk density ( D) and crushing strength, acid resistance, alkali resistance have been tested.

测试了样品的吸水率、气孔率、体积密度以及压碎强度和耐酸耐碱性。

The influence of α-Al2O3 micropowder additions on permanent linear change, apparent porosity, cold crushing strength and slag resistance of MgO-Al2O3 based castable is studied in this paper. By EDAX analysis, the mechanism of slag corrosion is investigated.

研究α-Al2O3微粉加入量对钢包渣线用镁铝质浇注料线变化率、显气孔率、耐压强度和抗渣性能的影响，借助EDAX分析，探讨了浇注料的渣蚀机理。

Influence of Crystalline Structure on Fracture Strength of Diamond Films

晶体结构对金刚石膜断裂强度的影响

The maximum tensile strength of the nanocrystalline copper reached to 590 MPa, about 4.5 times of the one of the coarse crystalline copper. The maximum tensile elongation of the nanocrystalline copper reached 10%.

制备的纳米晶铜最大抗拉强度高达590MPa，是普通粗晶铜的4.5倍，纳米晶铜的最大伸长率为10%。

Three culm traits, basal culm thickness ( BCT), culm length ( CL) and culm strength ( CS), of DH lines and their parents under upland and lowland ecosystems at milk stage were studied.

在水田、旱田栽培条件下，考查了乳熟期DH系及其亲本的茎基粗、茎秆长及茎秆强度等性状。

Analyzing the impact on the factor of the pea protein Mozzarella cheese curd strength.

影响豌豆蛋白Mozzarella干酪的凝乳强度因素分析。

Cured resin has excellent properties in tensile strength and fracture resistance.

浇注体具有较高的拉伸强度，优异的抗断裂韧性。

Wet curing to increase the strength and durability of mineral concrete

潮湿养护提高掺矿物混凝土强度和耐久性能

The factors of influence on shear strength of heat curing silicone rubber/ aluminum alloy were studied.

研究了影响热硫化硅橡胶与合金铝粘合剪切强度的几个因素。

The development and evaluation of F-Class quick curing high strength resin-rich fiberglass mica tape

F级快固化高强度环氧多胶玻璃粉云母带的研制及评定

The manufacture process was improved from the first cold bonding-post curing to primary cure by using the mold having chevron cell, and the adhesion strength between the chevron type of pattern and the belt body was improved, and the conveyance capability was significantly increased.

制作工艺由起初的冷粘合二次硫化改进为在硫化机上加装人字花纹模具一次整体硫化，提高了花纹和带体间的粘合强度，明显地增加了输送带的输送量；

The compressive strength also varied with the curing time.

养护时间不同，其抗压强度有明显的差异。

In this study, cement sand paste and common concrete with or without slag, fly ash and silica fume were used to investigate some accelerated curing on the strength and permeability of concrete.

本研究系由一般或使用炉石、飞灰或矽灰之水泥砂浆与混凝土来探讨加速养生及其试验法。

Heat-curing benefits the increase of strength which can still develop in 28 day water curing after heat-curing.

热养护有利于强度的提高，经热水养护后放置水中至28天龄期，其强度有较大提升，并没有出现强度倒缩现象。

The influence of four types of curing methods such as standard curing natural curing, water curing and curing method designed independently upon the strength and shrinkage of pulverized fly ash high performance concrete ( HPC) is studied.

试验研究了标准养护、自然养护、浸水养护以及一种带模供水养护方法对粉煤灰高性能混凝土的强度和收缩的影响。

The test results showed that at a tailings/ cement ratio of 6 ∶ 1 and paste backfill density of 80% and 28 day curing cycle, the compressive strength reached 3.79 MPa;

试验结果表明，在尾砂水泥比为6∶1，浓度80%时，28d抗压强度达到3.79MPa；

In face of the current situation of throwing events in our country, we must concentrate the existing strength, material and financial resources on the key aspects and problems.

面对我国投掷类项目的现状，我们必须集中现有人力、物力、财力，解决关键的环节和问题。

Residual stresses in the rail web of high strength rails from several foreign countries were measured by the saw cut method, and the effect of residual stress on rail web cracking was discussed.

通过采用锯切口法测定了几种进口高强度钢轨轨腰残余应力，阐述了残余应力对轨腰水平脆断的影响。

This material possesses high strength and toughness, its wear resistance being similar to that of ceramics. As a result, these tools show good performance in cutting high hardness materials.

这种刀具材料的耐磨性与陶瓷材料相近，并具有较高的强度和韧性，在切削高硬度材料时表现出良好的性能。

The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.

切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。