合金的例句大全

Adsorption of CO on cu { 001} c ( 2 × 2)-pd ordered surface alloy

CO在表面有序合金Cu{001}c（2×2）-Pd上的吸附

The site of CO adsorbed on Cu { 00l} c ( 2 × 2)-Pd ordered surface alloy has been studies using high resolution electron energy loss spectroscopy ( HREELS). CO molecules are bonded vertically only on top sites of Pd atoms at 240K.

用高分辨电子能量损失谱研究CO在有序表面合金Cu{001}c（2×2）-Pd上的吸附位置，在240K，CO仅直立地吸附在Pd原子的顶位；

Template-assisted electrochemical deposition of three-dimensionally ordered macroporous Fe-Ni alloy films

模板辅助电化学沉积三维有序大孔Fe-Ni合金膜

Simulation of Ordered Domain Interfaces Formed between DO_ ( 22) Phases in Ni-Al-V Alloy Using Microscopic Phase-Field Model

Ni-Al-V合金DO（22）相间有序畴界面的微观相场模拟

The regulation of incubation time, precipitation sequence and mechanism of Ni-Al-V alloy on the effect of temperature and concentration was first studied using the microscopic phase-field method, and the interphase boundary structure of ordered domain migration characteristic of interphase boundary and nucleation orientation was investigated.

本文以Ni-Al-V合金为对象，首次采用微观相场法系统研究了温度、浓度对成核孕育期、沉淀序列、沉淀机制的影响规律，以及有序畴界面结构、界面迁移性、形核取向性。

Application of High Alloy Steel on Wearing Parts of Slurry Pump

高合金钢在渣浆泵过流件上的应用

Optimizing Design on High Temperature Wearing Resistance Bead Welding Alloy for Valve Seal

阀门密封面高温耐磨堆焊合金优化设计

Introducing the performance of spraying welding layer for nickel wearing resistance alloy.

介绍了镍基耐磨合金喷焊层的性能。

Study on optimal decarburization condition of silicochromium in shaking ladle

硅铬合金摇包脱碳最佳工艺条件的研究

The basic principle of carburization of silicochromium alloy in shaking ladle is simply described.

本文简述了硅铬合金摇包脱碳的基本原理。

The acoustic emission characteristics reflect the macroscopic properties along rolling direction of high strength aluminum alloy.

高强度铝合金沿晶界断裂过程中的声发射信号特征反映了材料沿轧制方向的宏观性能。

Numerical analysis of surface flaking in finish rolled lead frame copper alloy

引线框架铜合金精轧薄板表面起皮剥落的数值分析

A Primary Summary of Development of Medium Silicon-molybdeum Refractory Cast Iron Die with Graphite Spheroidized for Creep Forming of Titanium Alloy Sheets

钛合金板材蠕变成形用的中硅钼耐热球墨铸铁模具研制初步总结

Experimental research on the creep age forming for aluminium alloy 2324

铝合金2324蠕变时效成形试验研究

FE analysis of creep age forming for Aluminum alloy 2324

2324铝合金蠕变时效成形有限元分析

During the creep aging process, aging and forming would be occured simultaneously and affected mutually. The pre-deformation, pre-aging, grain size, alloy composition and so on, would impact on the resilience and ultimate performance during creep age forming.

蠕变时效成形是蠕变和时效相互影响的过程，预变形、预时效、晶粒大小、合金成分等都会对蠕变时效成形的回弹和最终性能产生影响。

Carbide cutter Failure Analysis of Cemented Carbide Forming Tool in Grinding Process

硬质合金成型刀具刃磨加工失效分析

Phase-field Simulation of Dendritic Growth of a Binary Alloy Under a Forced Flow

相场法模拟对流作用下铝合金的枝晶生长

Hard Roll Facing Technology of Mg Alloy Wheel

镁合金机轮滚压强化工艺

At present, W and W alloy are considered as a promising candidate for plasma facing material ( PFM) of International Thermonuclear Experimental Reactor ( ITER) because of their high thermal conductivity, high melting and low sputtering erosion.

目前，钨和钨合金由于良好的热传导性，高熔点，低溅射率等优良特性被普遍认为是最有希望成为国际热核聚变实验堆（ITER）等离子体面壁材料的候选材料之一。