复合的例句大全

Finite Element Analysis about Lateral Deflection of Enclosure Structure

复合围护结构侧向变形的有限元分析

The construction and principle of the balanced compound gear pump is introduced.

介绍了平衡式复合齿轮泵结构原理.

The paper analyzed the deflection of a compound planetary gear set and calculated the damage percentage of its roller bearing.

针对某行星变速机构复合排行星齿轮和滚针轴承进行了受力变形分析和损伤率计算。

Physicochemical Properties and Cultivation Effects of Sawdust-compound Substrates on Cherry Tomato

木屑复合基质在樱桃番茄上的栽培效果初报

Chlorophyll contents, nitrate reductase activity, iron content and zinc content in the leaves were significantly increased after 72 h after nectarine trees and grapevines sprayed with fertilizers.

以油桃和葡萄为试材，喷施复合叶面肥72h后，叶片中叶绿体含量、硝酸还原酶活性、铁和锌含量显著提高；

The results showed that a complex thickening agent consisting of 0.2 g sodium alginate, 0.1 g gelatin and 1.0 g amylum in 100 g tomato pulp was the most advantageous to the product quality.

结果表明：在每100g番茄浆料中添加0.2g海藻酸钠、0.1g明胶和1.0g淀粉进行复合协同增稠，最有利于提高产品质量。

Effect of humate compound fertilizer on physiological characteristics and yield of wheat under irrigated and rain-fed conditions

灌溉和旱作条件下腐植酸复合肥对小麦生理特性及产量的影响

Some somatic embryos were originated from superficial cells of pre-embryonic complexes or somatic embryo.

本实验中所形成的体胚多数是以间接方式发生,有些体胚从胚性复合前体或体胚上直接产生.

In addition, use of composite material also can be easily realized the stealth aircraft.

此外, 利用复合材料也可以很容易地实现了隐形飞机的.

Based on conventional manufacture methods a new manufacturing process of foam sandwich structure composites is studied.

在传统泡沫夹层结构复合材料成型工艺基础上,探索了一种新型的夹层结构成型工艺.

A complex water-repellent gypsum additive was studied in this paper.

摘要采用特殊工艺制备了复合型石膏防水剂.

In the case of composite materials, the Peel strength is an important quality metrics.

对于复合材料而言, 剥离强度是其重要的质量评价指标.

Baldwin � � truth value restriction multiconditional fuzzy reasoning algorithms is presented in discrete membership function.

Baldwin的真值限定概念,给出了在离散隶属函数下的一组基于MAX-⊙ 复合运算和模糊关系Rb的多条件模糊真值推理算法.

Influence of complex plasticizers containing glycerol and xylitol on the soy protein plastics characteristics was studied.

研究了甘油和木糖醇复合增塑剂对大豆蛋白塑料特性的影响.

Electrical resistivity measurements of carbon fiber reinforced cement-based ( CFRC ) are conducted using the four-probe method.

研究四电极法中电板位置、电流大小、交直流等对碳纤维水泥基复合材料 ( CFRC ) 圆柱试样电阻率测试的影响.

Masonry composite walls with steels is a new-style structure system heat preservation of freezing zone.

轻钢龙骨复合墙体抗剪承载能力是轻钢龙骨体系建筑设计的关键参数.

Silver-epoxy resin compound conductive ointment was prepared by the preliminary study and choice of technology condition.

通过工艺条件的初探和优化选择,研制了银系———环氧树脂复合导电膏.

Niekle-based composite alloy powders were deposited on the Surface of Q 235 steel by plasma-arc surfacing.

采用等离子弧堆焊技术,在Q235钢表面堆焊镍基复合粉末.

Forward extruding for hollow pinion gear, compound extruding for housing gear and upending extruding for shaft gear and their forming conditions and processes were analyzed.

介绍了带孔小齿轮的正挤压直接成形、带壳小齿轮的复合挤压成形和带轴齿轮的镦挤成形等传统冷挤压方法，以及上述各类齿轮的冷挤压成形条件和工作过程。

The best performance of millimicron surface layer can be obtained when the composite material is molded under shaping pressure 1.5 GPa and annealed at 350 t, whose hardness is up to around 290.

压强为1.5GPa压制成型的复合材料，经350℃退火可获得最佳性能的纳米表面层，显微硬度值可达到290左右。